Updated November 2026

American goldfinch birdhouse plans call for a small, simple box with a 1-1/8-inch entrance and a shallow interior. This guide gives you a cut list, assembly steps, and the placement details that help goldfinches accept a box. You can build one in an afternoon from a single 1×6 board.

Know What Goldfinches Need Before You Cut

American goldfinches are late nesters. They usually start in July or August, after many other birds have finished, and they often use cup-shaped nests built from plant fibers rather than sticks. Because of this, they are more likely to accept a box with a small, neat opening and a floor that drains well. Avoid large interiors, which goldfinches do not need and which can stay damp.

Shopping for one? See our guide: 5 Best Birdhouses with License Plate Roof Plans for Backyard Builders (2026).

Plan the box for an interior floor of about 4 x 4 inches and an interior height of about 5 to 6 inches. A 1-1/8-inch entrance hole is the standard size for this species and keeps out larger competitors such as house sparrows.

Cut List and Materials

Use rough or untreated cedar, pine, or a similar softwood at least 3/4 inch thick. Pressure-treated lumber and painted or stained wood can contain chemicals that are harmful to birds, so skip them.

Part Quantity Dimensions
Front and back 2 3/4 in x 5-1/2 in x 9 in
Sides 2 3/4 in x 4-1/2 in x 9 in
Floor 1 3/4 in x 4-1/2 in x 4-1/2 in
Roof 1 3/4 in x 6 in x 7 in

Cut the front piece to 9 inches long, then drill the entrance hole 6 inches above the floor. Leave the front without a bottom cut, since the floor sits inside the walls.

Assembly Steps for a Sturdy Box

  1. Drill the 1-1/8-inch entrance hole in the front panel, centered 6 inches up from the bottom edge.
  2. Cut shallow grooves or score the inside faces of the front and back so the box can be cleaned later. Roughen the inside of the front panel below the hole so chicks can climb out.
  3. Attach the sides to the floor with exterior wood screws or galvanized nails, leaving the floor set slightly up from the bottom edges to drain.
  4. Fasten the front and back to the sides and floor. Drill four or five 1/4-inch drainage holes in the floor.
  5. Attach the roof with a hinge or screws so you can open it for cleaning. Overhang the roof about 1 inch on the front to shed rain.

Finishing and Mounting

Leave the wood unfinished on the inside. Outside, you can apply a light coat of exterior water-based sealer in a natural color. Mount the box 5 to 10 feet off the ground on a fence post or tree, facing away from prevailing winds and away from heavy afternoon sun. Goldfinches prefer open areas with nearby weedy plants such as thistle, which provide seed and nesting fiber.

  • Forstner bit set gives a clean, accurate 1-1/8-inch entrance hole without tear-out on the front panel. View on Amazon
  • Exterior wood screws hold the box together without rusting and are easy to remove when cleaning out old nests. View on Amazon
  • Hinged cedar roof hardware lets you open the box each fall for cleaning without damaging the roof. View on Amazon

Common Mistakes to Avoid

  • Making the entrance hole larger than 1-1/8 inches, which invites sparrows and starlings.
  • Forgetting drainage holes, which can leave nesting material wet and moldy.
  • Using treated or painted wood on the interior.
  • Mounting the box in full sun, where the interior can overheat.
  • Skipping annual cleaning. Remove old nesting material after the season ends.

If you want to compare other small-cavity designs before you commit, see Goldfinch Birdhouse Plans Free: 5 Easy Builds With Cut Lists for alternative layouts, or Wren Birdhouse Plans Free: Build a Cedar House in One Weekend for another compact nest box you can build with the same tools.

FAQ

What size hole do American goldfinches need?

A 1-1/8-inch entrance hole is the standard size for American goldfinches. It is large enough for them but small enough to keep out most larger birds.

When should I put up a goldfinch birdhouse?

Put the box up in early spring, before nesting begins. Goldfinches nest late, so a box in place by midsummer is still useful.

Do goldfinches reuse birdhouses?

They sometimes do, especially if the box is clean and the entrance is the right size. Clean the box after each season so it stays inviting.

Conclusion

With a single 1×6 board and a 1-1/8-inch Forstner bit, you can build a goldfinch box that fits the species’ needs. Keep the interior small, drill drainage holes, and mount the box 5 to 10 feet up in an open spot near thistle or other weedy plants. Clean it each fall, and it can serve for many seasons.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.