Updated November 2026

Black capped chickadee birdhouse plans call for a small, simple box with a 1-1/8 inch entrance hole, a floor of about 4 by 4 inches and a mounting height of roughly 5 to 10 feet. Follow the dimensions below and you will have a nest box that chickadees will accept and that is easy to clean each season. The whole build takes an afternoon with basic hand tools.

Know the Key Dimensions Before You Cut

Chickadees are cavity nesters that prefer a small opening. A 1-1/8 inch entrance keeps out larger birds such as starlings and sparrows, which compete for the same space. The interior floor should measure about 4 by 4 inches, and the cavity should be 8 to 10 inches deep from the entrance to the floor. Those numbers matter more than the exterior style, so keep them fixed even if you change the look of the box.

Shopping for one? See our guide: 5 Best Birdhouses with License Plate Roof Plans for Backyard Builders (2026).

Cut List and Materials

Use rough or dressed 3/4 inch untreated pine, cedar or cypress. Avoid pressure-treated lumber and painted or stained interiors, since fumes and residues can harm nesting birds. The cut list below builds a standard box:

Part Quantity Dimensions
Front and back 2 3/4 x 5-1/2 x 9 inches
Sides 2 3/4 x 4-1/2 x 9 inches
Floor 1 3/4 x 4 x 4 inches
Roof 1 3/4 x 6 x 7 inches

Build Steps

  1. Cut all parts to the sizes above, squaring the ends with a miter saw or hand saw.
  2. Drill drainage holes of 1/4 inch in each corner of the floor, then cut ventilation slots near the top of the sides if your climate is humid.
  3. Attach the floor between the side panels with exterior wood glue and 1-1/4 inch galvanized nails, leaving the floor recessed about 1/4 inch from the bottom edge to shed water.
  4. Fasten the front and back panels, then add the roof so it overhangs the front by about 1 inch.
  5. Drill the 1-1/8 inch entrance hole in the front panel, centered about 6 to 7 inches above the floor. Check the hole with a gauge if you have one.

Hinge the Roof or Side for Cleaning

Chickadees rebuild nests each year, so plan access from the start. Attach the roof with two hinges or hang one side panel on a hinge and secure it with a removable latch. Cleaning in late fall or early spring removes old nesting material and parasites.

Mounting and Placement

Mount the box 5 to 10 feet off the ground on a tree or post, facing away from prevailing winds and the afternoon sun. Keep it in partly open woodland or near shrubs where chickadees can forage. Use a smooth metal predator guard or a stovepipe if squirrels or cats are a problem.

Tips and Common Mistakes

  • Do not make the entrance larger than 1-1/8 inch; bigger openings invite competitors.
  • Do not add a perch. Chickadees do not need one, and perches help predators and house sparrows.
  • Do not paint or stain the interior.
  • Do not mount the box where it gets full sun all day, which can overheat nestlings.
  • Do not skip drainage holes; a damp floor is a common cause of nest failure.

A 1-1/8 inch hole bit or spade bit with a guide keeps the entrance accurate, which is the single most important dimension in this build. View on Amazon

A combination square helps you check that every cut is square before assembly, which keeps the box from racking. View on Amazon

Galvanized roofing nails resist rust and hold up to weather better than bright nails. View on Amazon

If you want to compare related designs before you start, these guides cover similar small cavity nesters: Birdhouse Plans for Chickadees: A Step-by-Step Guide for Beginners, Wren Birdhouse Plans Free: Build a Cedar House in One Weekend and Plans for Wren Birdhouse: A Step-by-Step Guide With Cut List. For a larger project, see Wood Birdhouse Plans Free: 6 Easy Builds With Cut Lists.

FAQ

What size hole do black-capped chickadees need?

A 1-1/8 inch entrance hole is the standard size. It admits chickadees while keeping out larger birds that compete for nesting sites.

Should I put a perch on a chickadee birdhouse?

No. Chickadees do not use perches, and perches can help house sparrows and predators reach the nest.

When should I clean out the box?

Clean the box in late fall or early spring, after nesting season, to remove old material and parasites before the next year.

Conclusion

With a 1-1/8 inch entrance, a 4 by 4 inch floor and the cut list above, you can build a chickadee box that fits what these birds need. Mount it in partly shaded woodland and open it each year for cleaning. A well-built box can host chickadees for many seasons.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.