Updated November 2026
Basic birdhouse plans free of charge can get you from a stack of scrap lumber to a finished nest box in one weekend. This guide gives you a simple, single-room design for common backyard songbirds, with a cut list, the key dimensions that matter for safety and nesting success, and assembly steps you can follow with a handful of basic tools.
Cut List and Materials for a Basic Birdhouse
Use 3/4-inch exterior-grade plywood, cedar or pine, and avoid pressure-treated wood because the chemicals can harm birds. The following cut list builds a box about 4 inches wide, 4 inches deep and 9 inches tall, with a 1 1/4-inch entrance hole.
Shopping for one? See our guide: 3 Best Free Printable Octagon Birdhouse Plans Frees (2026): Our Picks.
- Front: 4 1/2 in. x 9 in. (1 piece), with the entrance hole drilled 6 in. from the bottom
- Back: 4 1/2 in. x 13 in. (1 piece), extended up as a mounting tab
- Sides: 4 1/2 in. x 8 1/2 in. (2 pieces)
- Floor: 4 in. x 4 in. (1 piece), with 1/4-inch drainage holes
- Roof: 5 in. x 6 in. (1 piece), angled for runoff
How to Assemble the Birdhouse
Assembly takes about two hours, most of it spent waiting for glue to set. Drill the entrance hole and drainage holes before you join anything, since it is much easier to work on flat panels.
- Drill the 1 1/4-inch entrance hole in the front panel, centered 6 inches above the bottom edge.
- Glue and nail the sides to the floor, keeping the edges flush.
- Attach the front and back panels to the sides and floor with exterior wood glue and 1 1/4-inch galvanized or stainless nails.
- Attach the roof with hinges or screws so you can open the house for cleaning each fall.
- Sand the exterior edges lightly and leave the interior rough so young birds can climb out.
Mounting and Placement Details
Mount the house 5 to 10 feet off the ground on a post or tree, facing away from prevailing winds and direct afternoon sun. Avoid placing it near feeders, which attract predators and crowd nesting territory. For a broader look at site selection and nesting dimensions, the Free Plans for Building a Birdhouse: A Step-by-Step Guide for Beginners article covers the same basic principles in more depth.
Common Mistakes to Avoid
- Using treated lumber, paint or varnish on the interior, which can release harmful fumes.
- Making the entrance hole too large, which lets in predators and starlings.
- Skipping drainage holes, which leads to damp nests and mold.
- Mounting the box where cats or raccoons can reach it easily.
- Failing to clean the box after each nesting season.
Recommended Gear
A basic set of tools covers everything in this build. A drill with a 1 1/4-inch spade or Forstner bit makes clean entrance holes without splintering.
- A cordless drill and a set of brad point bits make drilling the entrance and drainage holes quick and accurate. View on Amazon
- Exterior wood glue holds joints firmly through rain and temperature swings. View on Amazon
- Stainless steel nails resist rust, which keeps the house intact for many seasons. View on Amazon
FAQ
What wood is best for a basic birdhouse?
Untreated cedar or pine is the most common choice because it is durable, lightweight and safe for birds. Exterior-grade plywood also works well if it is at least 3/4 inch thick.
What size entrance hole should I drill?
A 1 1/4-inch hole suits wrens, chickadees and bluebirds, while larger species need different dimensions. Matching the hole size to the species you want to attract helps keep out competitors.
When should I clean out the birdhouse?
Clean the box once nesting season ends, usually in late summer or early fall. Remove old nesting material and scrub the interior with hot water, then let it dry completely before the next season.
Conclusion
A basic birdhouse is one of the most rewarding first projects for a beginner woodworker. Follow the cut list, drill your holes accurately and mount the box in a safe spot, and you will have a sturdy home that can serve birds for years. Consult a local wildlife or nature center if you want species-specific advice before building.
