Updated November 2026
English dovecote birdhouse plans describe a tall, box-sided tower with a pyramid or hipped roof and a row of nesting compartments inside. You will finish with a sturdy outdoor structure that suits doves, pigeons and smaller songbirds, plus a clear cut list and assembly order to follow from start to finish.
Understanding the English Dovecote Design
A traditional English dovecote sits on a single post or a short masonry base, with walls that rise into a roof that often has a small cupola or ventilation opening. Inside, nesting ledges or cubbies line the walls. For a backyard version, most builders scale the tower down to about 18 to 24 inches square and 30 to 36 inches tall, which keeps the weight manageable and the interior easy to clean.
Shopping for one? See our guide: 5 Best Birdhouses with License Plate Roof Plans for Backyard Builders (2026).
Use 3/4-inch exterior plywood or cedar boards for the walls. Pressure-treated lumber works for the base, but keep it away from the nesting area because of chemical residue.
Cut List and Materials
Cut all parts before assembly so you can test-fit each joint. The following dimensions assume 3/4-inch stock for walls and floor and a 2×2 frame for corner posts.
- Four walls: 18 x 30 inches (exterior plywood or cedar)
- Floor: 18 x 18 inches
- Four roof panels: 12 x 16 inches, angled to meet at the apex
- Four corner posts: 2 x 2 x 32 inches
- Interior nesting ledges: four shelves, 8 x 6 inches each
- Entrance holes: one 1-1/2 inch hole per nesting compartment, drilled through the front wall
Exterior-grade screws, waterproof wood glue and a moisture-resistant finish round out the supply list.
Step-by-Step Assembly
- Assemble the floor frame and attach the four corner posts flush to its outer edge with exterior screws.
- Fasten the walls to the posts one at a time, checking square with a framing square after each panel.
- Install the interior nesting ledges at heights of about 10 inches and 20 inches, so each compartment has its own entrance.
- Drill the entrance holes and a few 1/4-inch drainage holes in the floor.
- Cut the roof panels at a 45-degree bevel on both ends so they meet cleanly at the top. Attach them to a central post or a top plate.
- Add a small ventilation gap under the roof eaves and a removable panel on one side for cleaning.
Joinery Tips
Glue and screw every joint rather than relying on screws alone. Pre-drill pilot holes near the edges of plywood to prevent splitting. Rabbet joints at the corners will hide end grain and shed water better than butt joints.
Finishing and Placement
Apply two coats of exterior primer and paint in a light, neutral color to reduce heat buildup inside the tower. Mount the dovecote on a post 10 to 15 feet off the ground, facing away from prevailing winds, and keep it clear of overhanging branches that let predators reach the entrances.
Common Mistakes
- Skipping drainage holes, which lets moisture collect and rot the floor.
- Using untreated interior surfaces that trap droppings and harbor mites.
- Making entrance holes too large, which invites starlings and squirrels.
- Building the roof without ventilation, so the interior overheats in summer.
- Mounting the structure too low where cats and raccoons can reach it.
Recommended Gear
- A speed square or framing square helps you keep every wall true during assembly. View on Amazon
- Exterior wood glue rated for outdoor use keeps the corner joints from loosening over seasons. View on Amazon
- A pilot bit set prevents splitting in plywood edges and makes screwing much cleaner. View on Amazon
FAQ
What size should a backyard dovecote be?
Most backyard versions measure about 18 to 24 inches square and 30 to 36 inches tall. That size is large enough for several nesting compartments while staying light enough to mount on a single post.
Which wood is best for english dovecote birdhouse plans?
Cedar and exterior-grade plywood resist moisture and hold screws well. Avoid treated lumber on interior surfaces where birds will nest.
Can I build the dovecote without a table saw?
Yes. A circular saw with a guide and a handsaw for small cuts will handle every part of this build. Take extra care to keep cuts square, since the walls must line up.
For more ideas, see Mourning Dove Birdhouse Plans: A Step-by-Step Build Guide and Plans for a Bluebird Birdhouse: Build One in a Weekend, which use similar joinery.
Conclusion
With a clear cut list, careful joinery and sensible placement, a dovecote built from these english dovecote birdhouse plans will serve birds for many seasons. Check the nesting compartments each spring, clean out old material and keep the entrances clear. A little maintenance goes a long way.
