Updated November 2026

Cedar birdhouse plans free of charge are easy to find, and a well-made cedar box can last many years outdoors. This guide gives you a simple plan for a wren-sized house, a complete cut list, the assembly order and the mistakes that most often cause problems for birds. You can finish the build in a single weekend with basic tools.

Why Cedar Works Best for a Birdhouse

Western red cedar and Eastern white cedar resist rot and insects without chemical treatment, which matters because birds should never nest in a box that has been painted with preservatives. Cedar is also light enough to mount easily and stable enough to hold its shape through wet and dry seasons. Use 3/4-inch nominal thickness boards, which measure about 0.72 inches actual. That thickness insulates well and holds screws firmly.

Shopping for one? See our guide: 3 Best Free Printable Octagon Birdhouse Plans Frees (2026): Our Picks.

Cut List and Materials for a Wren House

This plan uses one 1×6 cedar board about 36 inches long, plus a small piece for the roof. Cut all parts before assembly and label them.

Part Quantity Dimensions
Front and back 2 6 in x 8 in
Sides 2 4.5 in x 8 in (angle the top edges to match the roof slope)
Floor 1 4 in x 4 in
Roof 1 5 in x 7 in

Add a 1-1/8-inch entrance hole centered 6 inches above the floor on the front panel. Drill three or four 1/4-inch drainage holes in the floor and a row of ventilation holes just below the roof line on the sides.

Assembly Steps

  1. Drill the entrance hole and drainage holes before any assembly. It is much easier on flat boards.
  2. Attach the floor to the front and back panels with exterior-grade wood glue and 1-1/4-inch galvanized or stainless screws. Keep the floor flush with the bottom edges.
  3. Attach the sides to the front and back. Pre-drill every screw to prevent splitting cedar, which is soft and can crack near the edges.
  4. Fasten the roof with two hinged screws or a single screw at the front so you can open it for cleaning each fall.
  5. Leave the interior unfinished. Do not add paint, stain or sealant inside the box.

Mounting Height and Location

Mount the house 5 to 10 feet off the ground on a post or fence, facing away from prevailing winds and afternoon sun. Avoid placing it near feeders, which attract predators and crowd nesting territories.

A cordless drill with a bit set is the most useful tool for this project, because pilot holes and the 1-1/8-inch entrance hole both need clean, accurate drilling. A Forstner bit or a hole saw makes the entrance hole smoother than a spade bit.

Common Mistakes

  • Using treated lumber or painted cedar, which can harm nesting birds.
  • Drilling the entrance hole too large, which lets in starlings and house sparrows that compete with native species.
  • Omitting drainage holes, so rain pools on the floor and chills the nest.
  • Skipping pilot holes, which splits cedar at the ends of boards.
  • Mounting the box in full sun, where the interior can overheat during summer.

Further Plans to Explore

If a wren house suits your yard, the same construction method works for larger designs. Compare the Wren Birdhouse Plans Free: Build a Cedar House in One Weekend with the One-Board Birdhouse Plans Free: Build a Cedar House in One Afternoon for a simpler layout. Builders who want to attract bluebirds can follow Free Bluebird Birdhouse Plans: 5 Steps to Build a Nest Box This Weekend, which uses a slightly larger entrance and floor. For a single-board option, the One Board Birdhouse Plans: A Step-by-Step Build From a Single Cedar Board shows how to get every part from one length of wood.

FAQ

What size entrance hole should a cedar birdhouse have?

A 1-1/8-inch hole suits wrens, chickadees and bluebirds. Smaller holes exclude some species, while larger holes let in starlings and sparrows.

Can I use pressure-treated lumber for a birdhouse?

No. Pressure-treated wood contains chemicals that can harm birds and their eggs. Use untreated cedar instead.

When should I clean out an old birdhouse?

Clean the box after each nesting season, typically in late fall or early winter. Remove old nesting material and check for pests, and consult a local wildlife agency if you have questions about nesting species in your area.

Conclusion

With cedar birdhouse plans free from this guide, you can build a durable nest box in one weekend using basic tools. Follow the cut list, drill the entrance and drainage holes before assembly, and leave the interior unfinished. Mount the house in a shaded, wind-protected spot and clean it each fall.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.