Updated November 2026
Free cat birdhouse plans don’t really exist in the sense of a house built for cats, and that is the first thing to clear up. Most searchers want a birdhouse designed to keep neighborhood cats away from the nest, or a cat-themed build for a backyard display. This guide gives you a simple, free plan for a songbird nest box with a cat-resistant design, along with a cut list and build steps you can finish in a weekend.
Why Cat-Resistant Birdhouse Design Matters
Free-roaming cats are one of the biggest threats to backyard songbirds. A standard nest box can still be reached by a cat that climbs the post or reaches in through a wide opening. The design choices below cut that risk without making the box harder for birds to use. Keep in mind that no birdhouse is fully cat-proof, so pair it with good placement (covered later in this guide).
Shopping for one? See our guide: 3 Best Free Printable Octagon Birdhouse Plans Frees (2026): Our Picks.
Cut List and Materials for a Cat-Resistant Nest Box
This plan uses 3/4-inch cedar or untreated pine, which holds up outdoors and stays cool in summer. Dimensions below suit small songbirds such as chickadees, titmice and wrens.
| Part | Quantity | Dimensions |
|---|---|---|
| Front and back | 2 | 5 in × 9 in |
| Sides | 2 | 5 in × 7 in (angle top to 1 in taller at back) |
| Floor | 1 | 4 in × 4 in |
| Roof | 1 | 6 in × 7 in |
Other supplies: exterior wood screws (1 1/4 in), exterior wood glue, a 1 1/8-inch entry hole bit, and a drill.
Step-by-Step Build
Cut and Prepare the Parts
- Cut all pieces to the sizes in the cut list. Check each one with a square.
- Sand the inside faces lightly. Leave the inside rough enough that young birds can grip the walls when they climb out.
- Drill ventilation holes (1/4 inch) near the top of both sides.
Assemble the Box
- Attach the floor to the front and back, keeping the floor about 1/4 inch from the bottom edge so water drains.
- Add the sides with glue and two screws per side.
- Drill the entry hole 1 1/4 inches above the floor, centered on the front panel.
- Attach the roof with hinges or screws so you can open it for annual cleaning.
Add the Cat-Deterrent Features
Mount a 2-inch-deep wooden or metal guard or “entrance baffle” just inside the entry hole to prevent reaching paws from grabbing the edge. Keep the entry hole at 1 1/8 inches for chickadees and titmice so larger birds and most predators cannot enter.
Placement: The Most Important Factor
A well-built box still fails if it sits within easy reach of a cat. Mount the house on a 10-foot pole with a stovepipe or sheet-metal baffle at least 18 inches wide and about 2 feet below the box. Place the pole 10 feet or more from fences, trees and shrubs that a cat could climb or jump from. Face the entry away from prevailing winds and direct afternoon sun.
Common Mistakes
- Skipping ventilation holes, which lead to overheating on hot days.
- Using treated lumber or painted interiors that can harm nesting birds.
- Mounting the box on a fence or tree branch where cats can reach it easily.
- Making the entry hole too large, which lets in starlings and house sparrows.
- Forgetting to clean the box after each nesting season.
Recommended Gear
- A Forstner or spade bit set for 1 1/8-inch entry holes: clean, accurate holes reduce splintering at the entrance. View on Amazon
- Exterior wood glue: a waterproof bond that holds up to rain and temperature swings. View on Amazon
- Stainless steel exterior wood screws: they resist rust and won’t stain cedar. View on Amazon
For more builds with similar cut lists, see Wood Birdhouse Plans Free: 6 Easy Builds With Cut Lists and Free Plans for a Birdhouse: 6 Easy Builds With Cut Lists. If you want a larger house for owls or wood ducks, Large Birdhouse Plans Free: 4 Builds for Owls, Kestrels and Wood Ducks covers those dimensions.
FAQ
Can a birdhouse be made completely cat-proof?
No design is completely cat-proof, but a narrow entry, an entrance baffle and a pole with a wide baffle greatly reduce the risk. Good placement matters as much as the build.
What entry hole size works best for songbirds?
A 1 1/8-inch hole suits chickadees and titmice. Wrens prefer about 1 inch, while bluebirds need about 1 1/2 inches.
When should I clean out the birdhouse?
Clean it after each nesting season, once the young have fledged and before the next breeding season begins. Wear a dust mask when scraping out old nesting material.
Conclusion
You now have a free, cat-resistant nest box plan with a clear cut list, build steps and placement guidance. Build it from untreated cedar, keep the entry hole sized for your target birds, and mount it on a baffled pole away from cat access points. A simple box placed correctly gives songbirds a far safer place to raise their young.
