Updated November 2026
Free tree swallow birdhouse plans give you everything needed to build a nest box that tree swallows will actually use. The core design is simple: a box of roughly 5 by 5 inches inside, a 1 1/2-inch round entrance placed about 4 inches above the floor, and a removable side or roof for cleaning. You can finish the build in an afternoon with basic tools and rough-sawn or untreated lumber.
Dimensions and Cut List for Tree Swallow Plans
Tree swallows nest in open areas near water and fields, and they readily accept well-made boxes. Most published plans, including those from state wildlife agencies and the North American Bluebird Society, use similar proportions. Cut your pieces from 3/4-inch nominal lumber, which measures about 3/4 inch thick after planing.
Shopping for one? See our guide: 3 Best Free Printable Octagon Birdhouse Plans Frees (2026): Our Picks.
- Front: 5 1/2 in. wide by 10 in. tall, with the entrance hole 1 1/2 in. in diameter drilled 6 in. from the bottom
- Back: 5 1/2 in. wide by 12 in. tall, extended above the roof for mounting
- Sides (2): 5 1/2 in. wide by 8 in. tall, angled at the top to fit the roof
- Floor: 5 in. by 5 in., with four 1/4-inch drainage holes
- Roof: 7 in. by 7 in., hinged or held by a single screw for easy access
Confirm the entrance diameter before you drill. A hole larger than 1 1/2 inches invites starlings and house sparrows, which compete aggressively for nest space.
Build Steps for the Nest Box
- Cut all pieces to the lengths above, then check that the two side pieces are identical.
- Drill the entrance hole in the front piece using a Forstner bit or hole saw. Sand the edges lightly so they do not snag wings.
- Drill the four 1/4-inch drainage holes in the floor and roughen the inside surfaces of the front, back and sides with a saw kerf or scoring tool so young birds can climb out.
- Assemble the front, back and sides with exterior-grade galvanized screws. Pre-drill every screw to prevent splitting.
- Attach the floor so the bottom sits flush. Add the roof last, leaving it removable.
- Drill two mounting holes in the back piece above the roof line for a wire or nail.
Choosing the Right Wood
Use cedar, pine or other untreated softwood. Avoid pressure-treated lumber because its chemicals can harm nestlings, and skip painted interiors. Leave the inside bare and let the exterior finish be a clear or light stain, if any.
Mounting Location and Placement
Tree swallows prefer open sites with a clear flight path. Mount the box 5 to 10 feet high on a pole or post, facing away from prevailing winds. Keep it at least 100 feet from heavy brush, and place it within sight of water or an open field. A 1 1/2-inch round entrance is easier to protect from predators when the box is on a smooth metal pole with a predator guard.
Tree swallows are also well suited to Free Plans for a Birdhouse: 6 Easy Builds With Cut Lists-style small boxes, so one pole can hold more than one nest.
Common Mistakes
- Drilling an entrance larger than 1 1/2 inches, which lets in competing species.
- Skipping drainage holes, which leads to damp nests and chilled eggs.
- Mounting too low or too close to trees, which exposes the box to climbing predators.
- Using glue-only assembly or thin plywood that warps in the weather.
- Forgetting to clean out the box each fall, which spreads parasites to the next season.
Recommended Gear
- Forstner bit set: produces a clean, flat-bottomed entrance hole without tearout. View on Amazon
- Exterior galvanized deck screws: resist rust outdoors and hold the joints tight. View on Amazon
- Metal predator guard for poles: keeps raccoons and cats from reaching the nest. View on Amazon
FAQ
What size entrance hole do tree swallows need?
A 1 1/2-inch round entrance is the standard size for tree swallows. It admits swallows while keeping out larger competitors like starlings.
Should I paint the inside of a tree swallow box?
No. Leave the interior unfinished and untreated so the wood stays natural and nontoxic to nestlings.
When should I clean out the nest box?
Clean it in the fall after the breeding season ends. Remove old nesting material to reduce parasites and prepare the box for the next spring.
Conclusion
With these free tree swallow birdhouse plans, you can build a sturdy box in one afternoon using untreated softwood and exterior screws. Keep the entrance at 1 1/2 inches, mount the house in an open spot near water or a field, and clean it each fall. For more designs, browse the wider range of Free Woodworking Birdhouse Plans: A Step-by-Step Build for Beginners on the site.
