Updated November 2026
Bird shaped birdhouse plans give you a nest box that looks like a bird and still works for the species you want to attract. This guide walks you through a simple build: a bird silhouette made from one board, a floor, a roof, and an entry hole sized for your target species. You can finish the project in an afternoon with basic hand and power tools.
Choose the Bird Shape and Entry Hole
Start with the bird, not the box. A bird shape looks best when the body is roughly a rounded oval, the head is a smaller circle, and the tail angles down at about 30 degrees from horizontal. Sketch the outline on graph paper at a 1-inch grid, then scale it to fit a board about 6 inches wide and 10 to 12 inches tall.
Shopping for one? See our guide: 5 Best Birdhouses with License Plate Roof Plans for Backyard Builders (2026).
The entry hole decides which birds will use the house. A 1-1/8 inch hole suits chickadees and titmice, while a 1-1/2 inch hole suits bluebirds. Place the hole in the upper front of the body, about 6 to 8 inches above the floor, so predators have a harder time reaching in. If you are unsure which species visit your yard, check the Birdhouse Plans for Small Birds: A Step-by-Step Build Guide for hole sizes that match common backyard species.
Cut the Pieces and Assemble the Box
Use cedar, pine, or another rot-resistant softwood at least 3/4 inch thick. Avoid pressure-treated lumber, since the chemicals can harm nesting birds. A typical cut list for a bird-shaped house looks like this:
| Part | Quantity | Size |
|---|---|---|
| Front/back (bird silhouette) | 2 | 3/4 in. x 6 in. x 10 in. |
| Sides | 2 | 3/4 in. x 4 in. x 8 in. |
| Floor | 1 | 3/4 in. x 4 in. x 4 in. |
| Roof | 1 | 3/4 in. x 6 in. x 8 in. |
Cut the silhouette with a jigsaw or scroll saw, then sand the edges smooth. Drill drainage holes of 1/4 inch in each bottom corner of the floor and ventilation holes near the top of each side. Attach the sides to the front and back with exterior screws or galvanized nails, then fasten the floor inside the walls. Leave the roof hinged or removable so you can clean the box after nesting season.
Mount the Birdhouse Safely
Mount the box 5 to 10 feet off the ground on a post or a building with a predator guard. Face the entry away from prevailing winds, and avoid direct afternoon sun, which can overheat nestlings.
Finish the Build and Check the Details
Apply a clear exterior finish or leave the wood bare. Paint can be used on the outside only, and it should be a light, nontoxic color. Never paint or stain the inside. Add a rough texture to the inside walls, such as shallow scratches or a few saw kerfs, so nestlings can climb out when it is time to fledge.
Recommended gear
- A drill/driver set makes it easy to run screws straight and drill clean entry holes.View on Amazon
- A hole saw or spade bit set gives you precise entry holes in the right diameter for your target species.View on Amazon
- A scroll saw handles the curves of a bird silhouette better than most hand saws.View on Amazon
Common mistakes to avoid
- Making the entry hole too large, which lets predators or starlings in.
- Using treated lumber or painted interiors that can harm birds.
- Skipping drainage and ventilation, which leads to damp, unhealthy nests.
- Mounting the box in full sun or where cats can reach it.
- Forgetting to open the roof for cleaning between seasons.
FAQ
What wood is best for bird shaped birdhouse plans?
Cedar and pine are the most common choices because they resist rot and do not contain harmful chemicals. Use boards at least 3/4 inch thick for good insulation.
What entry hole size should I use?
A 1-1/8 inch hole works for chickadees and titmice, while 1-1/2 inches suits bluebirds. Match the hole to the species you hope to attract.
How high should the birdhouse be mounted?
Mount it 5 to 10 feet above the ground, away from direct afternoon sun and out of easy reach of climbing predators.
Conclusion
With a clear silhouette, a correctly sized entry hole, and safe materials, a bird-shaped house can be both a yard decoration and a working nest box. Build one this weekend, then clean it out after each nesting season so it stays ready for the next tenants.
