Updated November 2026

Black cap chickadee birdhouse plans give you a small, sturdy nest box sized for one of the most common backyard birds in North America. This guide covers the interior dimensions the birds need, a simple cut list, and the assembly steps. By the end, you will have a box that is safe for chickadees and easy to clean.

Know the Dimensions Before You Cut

Chickadees nest in cavities, and they prefer a small floor and a modest entrance. Most published plans use a floor of about 4 x 4 inches, an interior height of 8 to 10 inches, and an entrance hole of 1-1/8 inches in diameter. A larger hole lets in starlings and house sparrows, which compete for the same space. A smaller hole can keep the adult birds out entirely.

Shopping for one? See our guide: 5 Best Birdhouses with License Plate Roof Plans for Backyard Builders (2026).

Use rough-sawn or nominal 3/4-inch cedar, pine, or untreated fir. Avoid pressure-treated lumber and painted surfaces inside the box, since chemicals and fumes can harm nesting birds.

Cut List and Materials

Part Quantity Dimensions (inches)
Front 1 5-1/2 x 10-1/2 (drill entrance hole)
Back 1 5-1/2 x 12 (extends above sides for mounting)
Sides 2 4-1/2 x 10-1/2
Floor 1 4 x 4 (drill drainage holes)
Roof 1 6 x 7 (overhangs the front and sides)

You will also need exterior wood screws or galvanized nails, wood glue, and a piece of 1/4-inch hardware cloth or a short length of scrap wood if you want a removable side for cleaning.

Build the Box

  1. Drill the entrance hole in the front piece, centered about 6 to 7 inches above the bottom edge, using a 1-1/8-inch bit or a hole saw.
  2. Drill four to six 1/4-inch drainage holes in the floor and a few small ventilation holes near the top of each side.
  3. Glue and screw the sides to the floor so the floor sits between them.
  4. Attach the front and back to the assembly. Leave the front slightly proud of the sides, or keep them flush for a cleaner look.
  5. Attach the roof with two screws through the top so it can be lifted for annual cleaning. Add a small overhang on the front to shed rain.
  6. Score the inside of the front panel below the hole with a saw kerf or a few shallow grooves. This gives young birds grip when they leave the nest.

Mounting and Placement

Mount the box 5 to 10 feet off the ground on a tree or post, facing away from prevailing winds and the afternoon sun. Place it near a wooded edge or shrubs, but not so close that cats and squirrels can jump onto the roof. Use a single 1/4-inch screw or a loop of wire through the back, not nails that hold the box rigidly to a tree, since trees move and damage the bark.

Common Mistakes

  • Making the entrance hole too large. Stick to 1-1/8 inches for chickadees.
  • Skipping drainage holes. Trapped moisture leads to mold and cold, damp nests.
  • Using treated lumber or paint on the interior.
  • Mounting the box in full sun, where the interior can overheat in summer.
  • Cleaning the box in the middle of the nesting season. Clean it once in late fall or early winter.
  • Hole saw set with a 1-1/8-inch bit: Clean, accurate entrance holes are much easier with a dedicated bit than with a spade bit. View on Amazon
  • Exterior wood screws, stainless or coated: Corrosion-resistant fasteners keep the box solid through several seasons outdoors. View on Amazon
  • Waterproof exterior wood glue: A strong glue joint adds rigidity and keeps the seams tight against rain. View on Amazon

If you want more ideas for small cavity nesters, see Birdhouse Plans for Chickadees: A Step-by-Step Guide for Beginners and Wren Birdhouse Plans Free: Build a Cedar House in One Weekend for similar builds with different entrance sizes.

FAQ

What entrance hole size is right for a black capped chickadee?

A 1-1/8-inch entrance is the size most plans specify. It admits chickadees while keeping out larger competitors like European starlings.

Do chickadees need a perch under the entrance hole?

No. Chickadees cling to the rough surface beside the hole, so a perch is unnecessary and can help predators reach the nest.

When should I clean the birdhouse?

Clean it once in late fall or early winter, after nesting is finished. Remove old nest material and scrub the box with hot water, then let it dry fully before the next season.

Conclusion

A well-built chickadee box needs accurate dimensions, a 1-1/8-inch entrance, and proper drainage. Follow the cut list, mount the box at a safe height, and clean it once a year. With those basics, your box can host chickadees for many seasons.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.