Updated November 2026

Cardinal birdhouse plans PDF files give you a printable set of dimensions, a cut list, and assembly steps for building a nest box that suits northern cardinals. By the end of this guide, you will know the interior size, entry hole placement, and wood choices that make a cardinal house work, along with a checklist for cutting and assembling it. Keep in mind that cardinals are open-cup nesters and are not true cavity nesters, so a standard enclosed box is less likely to attract them than a sheltered shelf or dense shrub-style platform.

Understand What Cardinals Need Before You Cut Wood

Most published cardinal birdhouse plans PDF designs are based on a roughly 6 × 6 inch interior floor with a 7 to 8 inch height, but cardinals rarely use fully enclosed boxes. Their nests are open cups built in dense shrubs, vines, and conifers about 4 to 10 feet off the ground. A birdhouse can work if you give it an open front or a large open top and place it in heavy cover, but a wooden box with a small hole will mostly attract wrens, chickadees, and bluebirds instead.

Shopping for one? See our guide: 5 Best Birdhouses with License Plate Roof Plans for Backyard Builders (2026).

Before you start, decide which style you are building. A semi-open box with a wide front and a sloped roof is the most common choice for cardinals. A three-sided platform or open-front shelter fits even better if your goal is cardinal use specifically.

Build a Cardinal Birdhouse From a PDF Plan

Once you have a plan, follow the cut list exactly. Most designs use 3/4-inch untreated pine, cedar, or cypress boards. Plywood works if you use exterior-grade material, and it should be at least 1/2 inch thick.

Cut the Panels

  1. Cut two side panels to the height and depth in your plan, usually about 8 inches tall at the back and 6 inches at the front.
  2. Cut the front panel with a wide opening, around 4 to 5 inches high and 5 to 6 inches wide, for cardinal access.
  3. Cut the back panel, the floor, and the roof panel. Use a slight slope on the roof so water runs off.

Assemble the Box

  1. Drill pilot holes before driving screws to prevent splitting. Use exterior-rated screws or galvanized nails.
  2. Attach the floor first, then the sides, back, and front. Check for square at each corner.
  3. Add the roof and attach it with hinges or screws so you can clean the house out each fall.
  4. Drill four to six 1/4-inch drainage holes in the floor and two small ventilation holes near the top of the sides.

Mount the Birdhouse for Cardinal Use

Mount the house 5 to 10 feet high on a post or tree trunk, facing away from prevailing winds and direct afternoon sun. Place it near evergreen shrubs or a dense hedge, since cardinals want cover within a few feet of the nest. Avoid placing the house in open lawn, where predators have clear sight lines.

If you are also building for other species, compare sizing and mounting heights in the related guides, such as Northern Cardinal Birdhouse Plans: A Step-by-Step Guide for Beginners and Plans for Cardinal Birdhouse: Build a Cardinal-Sized Nest Box (Step-by-Step). If you want a simpler project to practice on first, Free Birdhouse Plans PDF: 6 Printable Designs With Cut Lists offers a good starting point.

  • Exterior-rated wood screws hold up to rain and temperature swings better than standard drywall screws. View on Amazon
  • A drill with a countersink bit keeps screw heads flush so the panels fit tightly. View on Amazon
  • A combination square helps you check that corners are 90 degrees before you fasten them. View on Amazon

Common mistakes to avoid

  • Using a small entry hole. Cardinals need a wide opening, not a 1 1/2-inch round hole.
  • Painting or staining the inside. Leave the interior bare so the wood breathes and does not trap moisture.
  • Mounting in full sun. Shade keeps the nest cooler during summer broods.
  • Skipping drainage holes. Trapped water leads to mold and rot in the nest area.
  • Cleaning in spring while birds are nesting. Clean out old nests in late fall or early winter only.

FAQ

Will cardinals actually use a birdhouse?

Cardinals sometimes use open-front or semi-open boxes placed in dense cover, but they prefer shrubs and vines. Enclosed houses with small holes are more likely to attract other species.

What size should a cardinal birdhouse be?

Most plans use a floor of about 6 × 6 inches and a height of around 7 to 8 inches, with a large open front. Always check the specific dimensions in your PDF before cutting.

What wood is best for a cardinal birdhouse?

Untreated cedar, cypress, or pine at 3/4 inch thickness are common choices. Avoid pressure-treated lumber, since the chemicals can harm birds.

Conclusion

A cardinal birdhouse plans PDF gives you accurate cut sizes, but the house only works if the design and placement suit cardinal nesting habits. Build a semi-open box with a wide front, mount it in dense cover, and keep it clean between seasons. Check local regulations and bird-specific guidance before you build for protected species.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.