Updated November 2026
Cedar birdhouse plans free of charge are easy to find, and a well-made cedar box can last many years outdoors. This guide gives you a simple plan for a wren-sized house, a complete cut list, the assembly order and the mistakes that most often cause problems for birds. You can finish the build in a single weekend with basic tools.
Why Cedar Works Best for a Birdhouse
Western red cedar and Eastern white cedar resist rot and insects without chemical treatment, which matters because birds should never nest in a box that has been painted with preservatives. Cedar is also light enough to mount easily and stable enough to hold its shape through wet and dry seasons. Use 3/4-inch nominal thickness boards, which measure about 0.72 inches actual. That thickness insulates well and holds screws firmly.
Shopping for one? See our guide: 3 Best Free Printable Octagon Birdhouse Plans Frees (2026): Our Picks.
Cut List and Materials for a Wren House
This plan uses one 1×6 cedar board about 36 inches long, plus a small piece for the roof. Cut all parts before assembly and label them.
| Part | Quantity | Dimensions |
|---|---|---|
| Front and back | 2 | 6 in x 8 in |
| Sides | 2 | 4.5 in x 8 in (angle the top edges to match the roof slope) |
| Floor | 1 | 4 in x 4 in |
| Roof | 1 | 5 in x 7 in |
Add a 1-1/8-inch entrance hole centered 6 inches above the floor on the front panel. Drill three or four 1/4-inch drainage holes in the floor and a row of ventilation holes just below the roof line on the sides.
Assembly Steps
- Drill the entrance hole and drainage holes before any assembly. It is much easier on flat boards.
- Attach the floor to the front and back panels with exterior-grade wood glue and 1-1/4-inch galvanized or stainless screws. Keep the floor flush with the bottom edges.
- Attach the sides to the front and back. Pre-drill every screw to prevent splitting cedar, which is soft and can crack near the edges.
- Fasten the roof with two hinged screws or a single screw at the front so you can open it for cleaning each fall.
- Leave the interior unfinished. Do not add paint, stain or sealant inside the box.
Mounting Height and Location
Mount the house 5 to 10 feet off the ground on a post or fence, facing away from prevailing winds and afternoon sun. Avoid placing it near feeders, which attract predators and crowd nesting territories.
Tools and Recommended Gear
A cordless drill with a bit set is the most useful tool for this project, because pilot holes and the 1-1/8-inch entrance hole both need clean, accurate drilling. A Forstner bit or a hole saw makes the entrance hole smoother than a spade bit.
- Cordless drill and driver set for pilot holes and screws. View on Amazon
- 1-1/8-inch Forstner bit for a clean entrance hole. View on Amazon
- Exterior wood glue rated for outdoor use. View on Amazon
Common Mistakes
- Using treated lumber or painted cedar, which can harm nesting birds.
- Drilling the entrance hole too large, which lets in starlings and house sparrows that compete with native species.
- Omitting drainage holes, so rain pools on the floor and chills the nest.
- Skipping pilot holes, which splits cedar at the ends of boards.
- Mounting the box in full sun, where the interior can overheat during summer.
Further Plans to Explore
If a wren house suits your yard, the same construction method works for larger designs. Compare the Wren Birdhouse Plans Free: Build a Cedar House in One Weekend with the One-Board Birdhouse Plans Free: Build a Cedar House in One Afternoon for a simpler layout. Builders who want to attract bluebirds can follow Free Bluebird Birdhouse Plans: 5 Steps to Build a Nest Box This Weekend, which uses a slightly larger entrance and floor. For a single-board option, the One Board Birdhouse Plans: A Step-by-Step Build From a Single Cedar Board shows how to get every part from one length of wood.
FAQ
What size entrance hole should a cedar birdhouse have?
A 1-1/8-inch hole suits wrens, chickadees and bluebirds. Smaller holes exclude some species, while larger holes let in starlings and sparrows.
Can I use pressure-treated lumber for a birdhouse?
No. Pressure-treated wood contains chemicals that can harm birds and their eggs. Use untreated cedar instead.
When should I clean out an old birdhouse?
Clean the box after each nesting season, typically in late fall or early winter. Remove old nesting material and check for pests, and consult a local wildlife agency if you have questions about nesting species in your area.
Conclusion
With cedar birdhouse plans free from this guide, you can build a durable nest box in one weekend using basic tools. Follow the cut list, drill the entrance and drainage holes before assembly, and leave the interior unfinished. Mount the house in a shaded, wind-protected spot and clean it each fall.
