Updated November 2026

Free birdhouse plans for finches give you a simple nest box with a small entrance hole, open ventilation and drainage, and a size that suits house finches and goldfinches. This guide walks through the dimensions, cut list and mounting steps so you can build one box in an afternoon. Finches are picky about the details, so the measurements matter more than fancy trim.

Know Which Finch You Are Building For

House finches and American goldfinches are the two species most likely to use a backyard box, and they have different needs. House finches tend to nest in the open, in hanging baskets, and in tight cavities, so a small box with a 1-1/4 inch entrance works well for them. Goldfinches often prefer open-front boxes or nest in shrubs late in the season, so a standard cavity box may sit unused. Decide which species you are targeting before you cut anything, because it changes the hole size and the layout.

Shopping for one? See our guide: 3 Best Free Printable Octagon Birdhouse Plans Frees (2026): Our Picks.

Cut List and Dimensions for a Basic Finch House

A plain rectangular box keeps the build simple and the nest chamber dry. Use untreated 3/4-inch cedar, pine or cypress, and avoid pressure-treated lumber and painted or stained interiors. The dimensions below produce an inside floor of about 4 by 4 inches and a height of about 6 inches, which is comfortable for a small cup nest.

Part Quantity Dimensions (inches)
Front and back 2 5-1/2 x 9
Sides 2 4 x 9
Floor 1 4 x 4
Roof 1 6 x 6

Build Steps for a Finch Nest Box

Once your cut list is ready, assembly takes only a few steps. Keep the work square and the interior free of glue squeeze-out that could trap a nesting bird.

  1. Cut the parts to the sizes above. Mark the front piece about 6 inches up from the bottom edge for the entrance hole.
  2. Drill the entrance hole with a 1-1/4 inch spade or Forstner bit, centered side to side and about 4 inches from the top of the front, which leaves room for the nest chamber below.
  3. Drill four or five 1/4-inch drain holes through the floor and two small ventilation holes near the top of each side.
  4. Assemble the sides, floor and back with exterior wood glue and 1-1/4 inch exterior screws. Pre-drill to prevent splitting.
  5. Attach the front with hinged screws or a hinge so you can open the box for cleaning in fall. Fix the roof with a 1-inch overhang on the front and sides to shed rain.

Mounting the Box

Mount the box 5 to 10 feet off the ground on a post, fence or tree in partial shade. Face the entrance away from prevailing winds and direct afternoon sun. Avoid placing it near feeders, where house sparrows and starlings gather and can crowd out finches.

Common Mistakes to Avoid

  • Making the entrance hole larger than 1-1/4 inch, which lets in sparrows and starlings.
  • Skipping drain holes, which leads to damp nests and chilled chicks.
  • Using painted or treated wood inside the box.
  • Leaving sharp screw points inside the nest chamber.
  • Installing the box in full sun, where the interior can overheat.
  • Forstner bit set: Makes clean, flat-bottomed holes in thin stock and works well for accurate entrance holes. View on Amazon
  • Exterior wood glue: Holds joints through rain and temperature swings without weakening. View on Amazon
  • Exterior-rated wood screws: Resist rust and keep the box from splitting over the seasons. View on Amazon

If you are building for other species too, Goldfinch Birdhouse Plans Free: 5 Easy Builds With Cut Lists covers open-front and shrub-nest designs. For a broader selection of simple cavity boxes, see Free Printable Birdhouse Plans: Step-by-Step Guide for Beginners. Builders who want a slightly larger project can compare Wood Birdhouse Plans Free: 6 Easy Builds With Cut Lists.

FAQ

What size hole do finches need?

A 1-1/4 inch entrance works well for house finches and keeps out larger competitors like starlings. Goldfinches often use open-front boxes instead, so a hole is not always needed for them.

When should I put up a finch birdhouse?

Install the box by late winter or early spring, before nesting starts. Finches often begin nesting in spring and may raise more than one brood in a season.

Should I clean the box between nests?

Yes, clean out old nesting material after each season, once the young have left and the nest is no longer in use. Wear gloves and a dust mask, and consult a wildlife professional if you find an active nest or have concerns about disease.

Conclusion

A well-sized box with a 1-1/4 inch entrance, drain holes and proper mounting gives finches a safe place to raise their young. Build from untreated lumber, keep the interior clean and simple, and place the box in partial shade away from feeders. With one afternoon of work, you can have a nest box that finches are likely to use.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.