Updated November 2026

Free cat birdhouse plans don’t really exist in the sense of a house built for cats, and that is the first thing to clear up. Most searchers want a birdhouse designed to keep neighborhood cats away from the nest, or a cat-themed build for a backyard display. This guide gives you a simple, free plan for a songbird nest box with a cat-resistant design, along with a cut list and build steps you can finish in a weekend.

Why Cat-Resistant Birdhouse Design Matters

Free-roaming cats are one of the biggest threats to backyard songbirds. A standard nest box can still be reached by a cat that climbs the post or reaches in through a wide opening. The design choices below cut that risk without making the box harder for birds to use. Keep in mind that no birdhouse is fully cat-proof, so pair it with good placement (covered later in this guide).

Shopping for one? See our guide: 3 Best Free Printable Octagon Birdhouse Plans Frees (2026): Our Picks.

Cut List and Materials for a Cat-Resistant Nest Box

This plan uses 3/4-inch cedar or untreated pine, which holds up outdoors and stays cool in summer. Dimensions below suit small songbirds such as chickadees, titmice and wrens.

Part Quantity Dimensions
Front and back 2 5 in × 9 in
Sides 2 5 in × 7 in (angle top to 1 in taller at back)
Floor 1 4 in × 4 in
Roof 1 6 in × 7 in

Other supplies: exterior wood screws (1 1/4 in), exterior wood glue, a 1 1/8-inch entry hole bit, and a drill.

Step-by-Step Build

Cut and Prepare the Parts

  1. Cut all pieces to the sizes in the cut list. Check each one with a square.
  2. Sand the inside faces lightly. Leave the inside rough enough that young birds can grip the walls when they climb out.
  3. Drill ventilation holes (1/4 inch) near the top of both sides.

Assemble the Box

  1. Attach the floor to the front and back, keeping the floor about 1/4 inch from the bottom edge so water drains.
  2. Add the sides with glue and two screws per side.
  3. Drill the entry hole 1 1/4 inches above the floor, centered on the front panel.
  4. Attach the roof with hinges or screws so you can open it for annual cleaning.

Add the Cat-Deterrent Features

Mount a 2-inch-deep wooden or metal guard or “entrance baffle” just inside the entry hole to prevent reaching paws from grabbing the edge. Keep the entry hole at 1 1/8 inches for chickadees and titmice so larger birds and most predators cannot enter.

Placement: The Most Important Factor

A well-built box still fails if it sits within easy reach of a cat. Mount the house on a 10-foot pole with a stovepipe or sheet-metal baffle at least 18 inches wide and about 2 feet below the box. Place the pole 10 feet or more from fences, trees and shrubs that a cat could climb or jump from. Face the entry away from prevailing winds and direct afternoon sun.

Common Mistakes

  • Skipping ventilation holes, which lead to overheating on hot days.
  • Using treated lumber or painted interiors that can harm nesting birds.
  • Mounting the box on a fence or tree branch where cats can reach it easily.
  • Making the entry hole too large, which lets in starlings and house sparrows.
  • Forgetting to clean the box after each nesting season.
  • A Forstner or spade bit set for 1 1/8-inch entry holes: clean, accurate holes reduce splintering at the entrance. View on Amazon
  • Exterior wood glue: a waterproof bond that holds up to rain and temperature swings. View on Amazon
  • Stainless steel exterior wood screws: they resist rust and won’t stain cedar. View on Amazon

For more builds with similar cut lists, see Wood Birdhouse Plans Free: 6 Easy Builds With Cut Lists and Free Plans for a Birdhouse: 6 Easy Builds With Cut Lists. If you want a larger house for owls or wood ducks, Large Birdhouse Plans Free: 4 Builds for Owls, Kestrels and Wood Ducks covers those dimensions.

FAQ

Can a birdhouse be made completely cat-proof?

No design is completely cat-proof, but a narrow entry, an entrance baffle and a pole with a wide baffle greatly reduce the risk. Good placement matters as much as the build.

What entry hole size works best for songbirds?

A 1 1/8-inch hole suits chickadees and titmice. Wrens prefer about 1 inch, while bluebirds need about 1 1/2 inches.

When should I clean out the birdhouse?

Clean it after each nesting season, once the young have fledged and before the next breeding season begins. Wear a dust mask when scraping out old nesting material.

Conclusion

You now have a free, cat-resistant nest box plan with a clear cut list, build steps and placement guidance. Build it from untreated cedar, keep the entry hole sized for your target birds, and mount it on a baffled pole away from cat access points. A simple box placed correctly gives songbirds a far safer place to raise their young.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.