Updated November 2026

Free church birdhouse plans printable are a practical way to build a steeple-style nest box without drafting your own pattern. A printable plan gives you full-size templates for the roof, sides and steeple, along with a cut list and assembly order. This guide shows you how to use those plans, what materials to pick, and how to avoid the errors that make a finished house hard to clean or unsafe for nesting birds.

Choosing a Printable Plan and Materials

Look for a plan that lists exact board dimensions, shows the pitch of the roof and includes a scale or a note that the template prints at 100 percent. Many free church designs use a single 1×6 or 1×8 board for the body, with a smaller piece for the steeple. Untreated cedar, pine or cypress works well because these woods resist rot and do not contain the harsh chemicals that can harm birds. Choose boards at least 3/4 inch thick so the walls stay stable and hold temperature.

Shopping for one? See our guide: 3 Best Free Printable Octagon Birdhouse Plans Frees (2026): Our Picks.

Building the Church Birdhouse Step by Step

Print the templates at 100 percent and check the scale with a ruler before you cut. Transfer the outlines to your boards with a pencil and a square, then cut each piece to size. Keep your cut list in order so you do not lose track of which piece is which.

  1. Cut the front, back, two sides and the floor. Make sure the front and back are the same height.
  2. Drill a 1-1/2 inch entrance hole in the front panel, centered about 6 to 8 inches above the floor for a standard wren or chickadee house. Adjust the hole size to the species you want to attract.
  3. Cut the roof panels and the steeple. Bevel the roof edges so the two panels meet at the ridge.
  4. Drill four to six 1/4 inch ventilation holes near the top of the side panels and a few 1/4 inch drain holes in the floor.
  5. Assemble the walls and floor with exterior-grade screws or galvanized nails. Pre-drill near the edges to prevent splitting.
  6. Attach the roof, then the steeple, and check that the whole structure sits square.

Cut List Example for a Standard Church House

Part Qty Board Notes
Front and back 2 1×6 cedar Front gets entrance hole
Sides 2 1×6 cedar Angled top if plan calls for it
Floor 1 1×6 cedar Drill drain holes
Roof panels 2 1×6 cedar Bevel ridge edges
Steeple 1 1×4 cedar Cut to printed template

Dimensions vary between printable designs, so always follow the measurements on your specific plan. If you want more layout ideas, Free Printable Birdhouse Plans: Step-by-Step Guide for Beginners covers the same process for other styles.

Finishing and Mounting the Birdhouse

Leave the inside of the house unfinished and unpainted so the wood can breathe and birds are not exposed to fumes. You can paint or stain the exterior with a non-toxic, water-based finish in a neutral color. Let it dry fully before you mount it. Mount the house on a post or pole at least 5 feet off the ground, or on a tree with the entrance facing away from prevailing winds. Keep it away from feeders and perches that attract predators.

Common Mistakes to Avoid

  • Printing at “fit to page,” which shrinks the template and throws off every measurement.
  • Skipping the drain holes, which lets water pool on the floor and rot the house from inside.
  • Using pressure-treated lumber, which can contain compounds you want to keep away from nesting birds.
  • Making the entrance hole too large, which lets starlings and house sparrows take over.
  • Mounting the house in full sun, which can overheat the nest in summer.

For a broader look at other styles you can build from printable patterns, see Free Birdhouse Plans and Patterns: 8 Printable Designs to Build This Weekend and Church Birdhouse Plans Free: 3 Builds With Cut Lists and Steps.

  • Exterior wood screws hold the joints firmly and resist rust in outdoor conditions. View on Amazon
  • A hole saw set makes clean, accurate entrance holes in the front panel. View on Amazon
  • A combination square helps you mark square cuts and check that the walls meet at true right angles. View on Amazon

FAQ

Do free church birdhouse plans printable need special software?

No. Most plans are saved as PDF files that open in any standard reader. Print them at 100 percent scale on letter or A4 paper and check the scale bar before cutting.

What entrance hole size should I use?

A 1-1/4 to 1-1/2 inch hole suits most small songbirds such as wrens and chickadees. Larger holes invite starlings and sparrows, which often displace native species.

Can I build a church birdhouse from scrap wood?

Yes, as long as the boards are at least 3/4 inch thick, free of cracks and untreated. Check that each piece matches the dimensions on the cut list before assembly.

Conclusion

Printable church plans make a steeple birdhouse accessible to any builder who can make straight cuts. Print at full scale, follow the cut list, and include drain and ventilation holes. A well-made house mounted in the right spot can attract nesting birds for many seasons.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.