Updated November 2026

Great horned owl birdhouse plans give you a large, weatherproof nest box sized for one of North America’s biggest owls. This guide walks you through the dimensions, a cut list, the assembly order, and the placement details that help a great horned owl accept the box. You will finish with a box that is roomy enough for a nesting pair and built to hold up for years.

Understand What a Great Horned Owl Needs

Great horned owls do not carry in materials. They use existing platforms, cavities, or abandoned stick nests, so your box has to look like a safe, low-disturbance site. The floor needs to be large, and the interior needs enough depth for a female to sit on a clutch of two to three eggs. Most owl boxes built for this species have an interior floor of roughly 24 by 24 inches, though many successful builds are slightly smaller. Check your local conservation or extension office for regional guidance before you commit to final dimensions.

Shopping for one? See our guide: 5 Best Birdhouses with License Plate Roof Plans for Backyard Builders (2026).

Because adults are heavy and nestlings grow fast, the box should be built from thick, stable lumber. Avoid thin plywood for the floor and walls. Use exterior-grade plywood at least 3/4 inch thick, or solid lumber with the same thickness.

Cut List and Materials

The table below gives a working cut list for a basic box. Confirm all dimensions against the owl’s needs in your area before cutting, since many plans vary the floor size and height.

Part Quantity Dimensions Material
Floor 1 24 x 24 in. 3/4 in. exterior plywood
Front and back 2 36 x 24 in. 3/4 in. exterior plywood
Sides 2 36 x 24 in. 3/4 in. exterior plywood
Roof panels 2 26 x 28 in. 3/4 in. exterior plywood
Perch rail 1 24 x 3 in. 2×4 lumber

You will also need exterior-grade screws, waterproof wood glue, a drip-edge strip for the roof, and a few galvanized hinges or a removable panel for access.

Build and Assemble the Box

  1. Cut all panels to the sizes above. Double-check the sides for square ends before you start assembly.
  2. Attach the sides to the floor with glue and screws, keeping the edges flush. Then add the front and back panels.
  3. Drill drainage holes of about 1/4 inch in each corner of the floor so rain and condensation can escape.
  4. Attach the perch rail below the entrance. Owls use it to step out, so it should project at least 3 inches from the wall.
  5. Build the roof from two angled panels with a slight overhang. Fasten it with hinges so you can open the box for cleaning.
  6. Seal exterior surfaces with a non-toxic, water-based exterior finish. Leave the interior unfinished so the wood stays dry and natural.

For more on the same large-cavity approach, see Birdhouse Plans for Owls: A Step-by-Step Build With Cut List and Large Birdhouse Plans Free: 4 Builds for Owls, Kestrels and Wood Ducks.

Placement and Mounting

Mount the box 12 to 20 feet high on a sturdy trunk or pole, facing away from prevailing winds. Choose a site near open hunting ground and away from heavy foot traffic. Use a mounting bracket or a few heavy-duty lag bolts so the box does not sway. Owls return to the same territory for years, so a well-placed box can be used for a long time.

Common Mistakes to Avoid

  • Building the box too small. Owls need room, and a cramped box can lead to abandonment.
  • Skipping drainage holes, which allows moisture to build up and rot the floor.
  • Mounting the box in full sun, which can overheat nestlings.
  • Using untreated or unseasoned lumber that warps as it dries.
  • Checking on the nest too often, which can cause adults to leave.
  • Exterior-grade wood glue keeps joints tight through seasonal swings. View on Amazon
  • Stainless or coated exterior screws resist rust better than standard drywall screws. View on Amazon
  • A cordless drill with a bit set makes quick work of pilot holes and drainage holes. View on Amazon

FAQ

What size should a great horned owl birdhouse be?

Many plans use a floor of about 24 by 24 inches with a box height near 36 inches. Check local guidance, since requirements can differ by region.

Where should I hang a great horned owl box?

Mount it 12 to 20 feet high on a sturdy support, away from heavy traffic and direct afternoon sun. A spot near open hunting ground works well.

Do owls use a birdhouse without help?

Great horned owls may or may not accept a new box, since they prefer large cavities or old stick nests. A box placed in good habitat has a better chance of being used.

Conclusion

Good great horned owl birdhouse plans start with correct dimensions, thick exterior materials, and proper drainage. Build the box with a sturdy perch and a stable mount, and place it in suitable habitat. With those details in place, you give a large owl a safe place to raise its young.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.