Updated November 2026

Hummingbird birdhouse plans free of charge are easy to find, but many of them are built wrong for these tiny birds. This guide gives you a simple cedar build with a cut list, clear steps and the sizing details that matter. You will finish with a small, weather-resistant house you can mount in a shaded spot near a feeder or flowering plants.

First, a quick reality check. Ruby-throated hummingbirds rarely use conventional birdhouses. They build cup nests on branches, usually from plant down and spider silk. A birdhouse can still work as a shelter or a perch-friendly structure, and some people use one as a resting spot near a feeder. Treat this as a feeding-area accessory, not a guaranteed nest site.

Shopping for one? See our guide: 3 Best Free Printable Octagon Birdhouse Plans Frees (2026): Our Picks.

Cut List and Materials

Use 3/4-inch cedar or another rot-resistant softwood. Avoid treated lumber, because preservatives can harm birds. Cut the following pieces:

  • Front and back: two pieces, 6 inches wide by 8 inches long
  • Sides: two pieces, 4 inches wide by 8 inches long (cut the top edges at a 45-degree angle to create a slope)
  • Floor: one piece, 4 inches by 4 inches
  • Roof: two pieces, 5 inches by 6 inches

Plan on a 1-inch entry hole near the top of the front panel, though many hummingbird designs use an open front instead. An open front with a perch-style ledge suits these birds better than a tight box.

Step-by-Step Build

  1. Cut all pieces to size and sand the edges smooth.
  2. Drill a few 1/4-inch drainage holes in the floor and sides.
  3. Attach the sides to the floor with exterior wood glue and 1 1/4-inch galvanized screws. Keep the floor flush at the bottom.
  4. Attach the front and back panels to the sides, keeping the corners square.
  5. Fix the roof pieces at a slight angle so water sheds away from the front. Leave the roof removable or hinged for cleaning.
  6. Apply two coats of exterior, non-toxic finish to the outside only. Leave the inside bare.

Placement and Mounting

Mount the house 6 to 10 feet off the ground on a pole or a sturdy branch. Choose a spot with morning sun and afternoon shade, which keeps the interior from overheating. Place it within 15 to 20 feet of a nectar feeder or a patch of tubular flowers such as bee balm, salvia or trumpet vine. Face the entry away from prevailing winds.

Common Mistakes to Avoid

  • Using pressure-treated or painted interiors, which can release harmful chemicals.
  • Making the entry hole too large, which invites predators and larger competitors.
  • Skipping drainage holes, which lets moisture build up and rot the floor.
  • Mounting the house in full sun, where the inside can become dangerously hot.
  • Expecting hummingbirds to nest in it. Set realistic goals and enjoy the visits.
  • Exterior wood glue holds joints together and stays flexible through freeze-thaw cycles. View on Amazon
  • Stainless steel exterior screws resist rust better than plain steel in damp conditions. View on Amazon
  • A drill with a stepped bit set makes clean entry holes and drainage holes without splitting the wood. View on Amazon

For more cut lists and builds in this series, see Wren Birdhouse Plans Free: Build a Cedar House in One Weekend and Robin Birdhouse Plans Free: Build a Nest Box With Cut List. If you want a more formal layout, Free Plans for Building a Birdhouse: A Step-by-Step Guide for Beginners covers general joinery and finishing.

FAQ

Do hummingbirds actually nest in birdhouses?

Rarely. Most hummingbirds build small cup nests on branches, so a standard birdhouse is seldom used for nesting. A feeding-area shelter or perch structure is a more realistic goal.

What wood is safest for a hummingbird house?

Untreated cedar or another rot-resistant softwood is a good choice. Avoid pressure-treated lumber and painted interiors, since preservatives and paint can be harmful to birds.

Where should I hang a hummingbird house?

Mount it 6 to 10 feet high in a partly shaded spot, near a feeder or nectar-rich flowers. Morning sun and afternoon shade help keep the interior from overheating.

Conclusion

This simple cedar build gives you a sturdy, well-drained structure that fits neatly into a backyard feeding area. Keep the interior unfinished, mount it in a shaded spot, and set your expectations around visits rather than nests. With a careful build, you will have a useful addition to your hummingbird garden.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.