Updated November 2026

A good set of plans for dovecote birdhouse builds gives you everything you need to cut, assemble and mount a nest box that doves and pigeons will actually use. This guide covers the basic dimensions, a cut list in standard lumber sizes, the assembly order, and the placement details that decide whether birds move in. Plan on a weekend for one house if you are comfortable with a miter saw and a drill.

Choose Dimensions and Materials

Dovecote-style houses are roomier than small songbird boxes, usually with a floor of about 12 inches square and an interior height of 12 to 14 inches. Doves and pigeons need open space above the nest platform and a wide entry, so do not shrink the design to fit a smaller box. Use rough-sawn cedar or pine at 3/4 inch thickness. Cedar resists rot and holds paint well, and it is a common choice in published dovecote plans.

Shopping for one? See our guide: 5 Best Birdhouses with License Plate Roof Plans for Backyard Builders (2026).

Cut List and Assembly Steps

Cut the following pieces from 3/4-inch boards. Dimensions are finished sizes, so measure your stock after ripping.

  • Floor: 1 piece, 12 in × 12 in
  • Front and back: 2 pieces, 14 in × 12 in (back is the same, with no entry hole)
  • Side walls: 2 pieces, 12 in × 14 in, with the top edge angled to fit the roof
  • Roof: 2 pieces, 14 in × 8 in, overlapping at the peak
  • Entry hole support perch: 1 piece, 6 in × 2 in
  1. Drill drainage holes, about 1/4 inch, in the floor corners.
  2. Attach the floor between the side walls with exterior screws, pre-drilling every hole.
  3. Add the front and back panels, keeping the top edges flush.
  4. Fix the roof pieces so they overhang the front by 2 to 3 inches for rain protection.
  5. Cut the entry opening as a wide oval or round hole about 3 inches across, placed 8 to 10 inches above the floor.
  6. Screw the perch below the entry, then sand edges and apply two coats of exterior, non-toxic finish on the outside only.

Mounting and Placement

Mount the house 8 to 15 feet off the ground on a post, pole or sturdy bracket. Face the entry away from prevailing winds and avoid direct afternoon sun, which can overheat the interior. Doves and pigeons tolerate some human activity, but a quiet, partly sheltered spot improves occupancy. If you want a quick overview of how other families are built, the English Dovecote Birdhouse Plans: A Step-by-Step Build Guide walks through an alternative layout, and the Dovecote Birdhouse Free Dovecote Plans PDF: Build One in a Weekend covers a printable version.

  • Exterior wood screws: stainless or coated screws resist rust and keep the joints tight as the wood moves. View on Amazon
  • Forstner bit set: clean, flat-bottomed holes for the entry and drainage openings. View on Amazon
  • Exterior wood finish: a non-toxic, water-based sealer protects the exterior without harming birds. View on Amazon

Common Mistakes to Avoid

  • Making the entry too small. Doves need a wide, low opening, so keep it at roughly 3 inches.
  • Skipping drainage holes. Trapped moisture leads to mold and nest failure.
  • Using treated lumber or painting the interior. Stick to untreated, unfinished wood inside.
  • Mounting too low. Raise the house to discourage predators and disturbance.
  • Forgetting to clean the box between nesting seasons.

FAQ

What size should a dovecote birdhouse be?

A floor of about 12 inches square and an interior height of 12 to 14 inches works well for most doves and pigeons. Keep the entry around 3 inches across and place it 8 to 10 inches above the floor.

What wood is best for dovecote plans?

Cedar and pine are common choices because they are durable and easy to cut. Use untreated, unpainted wood on the inside to keep the nest area safe for birds.

When should I put up a dovecote birdhouse?

Install it before nesting season begins, typically in early spring. Clean out old material once the season ends so the box is ready for the next pair.

Conclusion

With these plans for dovecote birdhouse builds, you can produce a sturdy, well-ventilated nest box in a single weekend. Pay close attention to entry size, drainage and mounting height, since those details matter most to the birds. Check the Wood Birdhouse Plans Free: 6 Easy Builds With Cut Lists for more designs once you are comfortable with the process.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.