Updated November 2026

Simple cedar birdhouse plans give you a nest box that songbirds can use, built from a few straight cuts and basic screws. This guide walks you through a small, open-front-free design with a 1-1/4 inch entry hole, a removable roof, and a floor that drains. You will finish with a box that is easy to clean and sized for wrens, chickadees, and similar cavity nesters.

Cut List and Materials

Cedar resists rot and holds fasteners well, which matters because a birdhouse sits outdoors through every season. Use a 1×6 cedar board about 6 feet long, or a 1×8 if you want a slightly larger interior. Cut the pieces to these dimensions:

Shopping for one? See our guide: 5 Best Birdhouses with License Plate Roof Plans for Backyard Builders (2026).

  • Front and back: 2 pieces, 1/2 inch thick, 5-1/2 inches wide by 9 inches tall (back piece 9 inches; front piece 7-1/2 inches with a 1-1/4 inch entry hole drilled 6 inches from the floor).
  • Sides: 2 pieces, 1/2 inch thick, 5 inches wide by 8 inches tall, with the top edges angled to meet the roof.
  • Floor: 1 piece, 1/2 inch thick, 4 inches by 4 inches, with four 1/4 inch drainage holes.
  • Roof: 1 piece, 1/2 inch thick, 7 inches by 7 inches, sized to overhang the front by about 1 inch.

Add 1-1/4 inch exterior screws, a drill with a 1-1/4 inch hole saw or spade bit, and waterproof exterior wood glue if you want extra hold.

Step-by-Step Assembly

Work on a flat surface and check that your cuts are square before you drive a single screw. Small errors compound quickly on a box this size.

  1. Drill the entry hole. Mark the center of the front piece 6 inches above the bottom edge. Drill the 1-1/4 inch hole with a hole saw, then sand the edges smooth so feathers and tiny feet are not snagged.
  2. Attach the sides to the back. Apply glue to the edges, then drive two screws through the back piece into each side. Keep the screws about 1/2 inch from the edges to prevent splitting.
  3. Add the floor. Set the floor inside the walls, flush with the bottom, and fasteners through the sides. Drill the drainage holes before assembly so you do not have to work around the finished box.
  4. Attach the front. Line up the front piece so its edges sit flush with the sides, then screw it in place. Leave the front unglued if you plan to open it for cleaning.
  5. Install the roof. Center the roof so it overhangs about 1 inch at the front. Use two hinges or a single screw at the back, so the roof lifts for annual cleaning.

Mounting and Placement

Mount the box 5 to 10 feet off the ground on a post or the side of a tree, facing away from prevailing winds. Position the entry hole so it faces east or southeast, which keeps the interior warmer in the morning. Avoid placing it where predators like cats can reach the front in one jump.

Common Mistakes

  • Using pressure-treated lumber, which can contain chemicals harmful to birds. Stick with untreated cedar.
  • Adding a perch under the entry hole. Songbirds do not need one, and it gives predators an easy grip.
  • Skipping drainage holes, which lets moisture pool and encourages mold.
  • Painting or staining the interior. Keep the inside bare and clean.
  • Making the entry hole too large, which lets in starlings and other competitors.
  • Hole saw kit: A set of hole saws makes clean entry holes in cedar without tearing the grain. View on Amazon
  • Exterior wood screws: Coated deck-style screws resist corrosion from outdoor moisture. View on Amazon
  • Cordless drill driver: A drill with an adjustable clutch helps you avoid overdriving screws into thin cedar. View on Amazon

If you want more build options, the Wren Birdhouse Plans Free: Build a Cedar House in One Weekend and the Cedar Picket Birdhouse Plans: Build a Simple Nest Box in One Weekend cover similar sizes with different layouts. For smaller species, see Plans for Wren Birdhouse: A Step-by-Step Guide With Cut List.

FAQ

What birds will use this simple cedar birdhouse?

The 1-1/4 inch entry hole suits house wrens, chickadees, and titmice. Larger birds or species with bigger entry requirements will need a different plan.

How often should I clean the birdhouse?

Clean it once a year after the nesting season ends, removing old nesting material. Do this in late summer or early fall, before winter roosting.

Can I use a different wood?

Untreated pine or another rot-resistant wood works, but cedar lasts longer outdoors. Avoid pressure-treated lumber and painted boards.

Conclusion

With a few straight cuts and a hole saw, you can build a cedar nest box that stays sturdy for years. Follow the cut list, keep the interior bare, and mount the box where predators cannot reach it easily. Consult a local wildlife or extension office if you are unsure which species nest in your area.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.