Updated November 2026
Swallow birdhouse plans free of charge are easy to find, and the best ones give you exact dimensions, a cut list and a clear build order. This guide walks you through a simple nest box for tree swallows and similar cavity-nesting swallows, along with the entrance size, mounting height and spacing that help these birds settle in. You can build one in an afternoon using untreated cedar or pine and basic hand tools.
Know Which Swallow You Are Building For
Tree swallows are the species most likely to use a nest box, and they prefer open fields, marshes and farm edges. Barn swallows and cliff swallows generally build open or mud nests and do not use standard boxes, so plans for them are not really birdhouse plans. Build for tree swallows unless you have a specific reason to do otherwise.
Shopping for one? See our guide: 3 Best Free Printable Octagon Birdhouse Plans Frees (2026): Our Picks.
The nest cavity should be roughly 6 inches square and about 6 to 8 inches deep. The entrance hole should measure 1-1/2 inches in diameter, which keeps out larger starlings and house sparrows while letting swallows in. Many free plans from state wildlife agencies and bird conservation groups use these same measurements.
Cut List and Materials
Use rough or smooth untreated cedar, pine or cypress at 3/4 inch thickness. Avoid pressure-treated wood, since the chemicals can harm nesting birds. The following cut list builds one box with a front, back, two sides, a floor, a roof and a pair of mounting cleats.
| Part | Quantity | Dimensions |
|---|---|---|
| Front | 1 | 5-1/2 in x 10 in (drill entrance hole at 7 in from floor) |
| Back | 1 | 5-1/2 in x 10 in |
| Sides | 2 | 5-1/2 in x 9 in |
| Floor | 1 | 5-1/2 in x 5-1/2 in |
| Roof | 1 | 7 in x 7 in |
Step-by-Step Build
- Cut all pieces to the sizes above. Square each edge with a speed square before assembly.
- Drill the 1-1/2 inch entrance hole in the front board, centered side to side and about 7 inches above the bottom edge.
- Drill four 1/4 inch drainage holes in the floor and a few small ventilation holes near the top of the back and sides.
- Attach the floor between the sides and front using exterior wood glue and 1-1/4 inch exterior screws. Leave the front panel unattached at first so you can reach inside.
- Attach the back panel, then the front, so the front can be removed for cleaning later. Use a single hinged or screw-on front.
- Fasten the roof with a 1 inch overhang on the front and sides to shed rain. Add a hinge or a single screw on one side so you can open the box in fall.
- Screw a cleat or mounting bracket to the back. Mount the box 5 to 10 feet off the ground on a post or fence line in an open area, with the entrance facing away from prevailing winds.
Placement and Spacing
Place tree swallow boxes in open fields or near water, about 50 to 100 feet from dense woods. Space boxes at least 15 to 20 feet apart, since swallows defend nesting territory. Clean out old nesting material after each season, and avoid checking boxes during active nesting, which can cause birds to abandon the nest.
Common Mistakes
- Using a hole larger than 1-1/2 inches, which lets in starlings and sparrows that compete for the box.
- Painting or staining the inside, which can release fumes and harm chicks.
- Skipping drainage holes, so the floor stays wet and nestlings are at risk.
- Mounting the box in a shaded spot or directly against a tree where predators can climb.
Recommended Gear
- Exterior wood glue: Adds strength to joints that will face weather for years. View on Amazon
- Exterior screws: Corrosion-resistant screws hold the box together and resist splitting in cedar. View on Amazon
- Forstner bit set: Gives clean, accurate holes for the entrance and drainage openings. View on Amazon
For more ideas, see Free Woodworking Birdhouse Plans: A Step-by-Step Build for Beginners and Free Plans for a Birdhouse: 6 Easy Builds With Cut Lists. If you want a different species, Wren Birdhouse Plans Free: Build a Cedar House in One Weekend uses a similar construction method with a smaller entrance.
FAQ
What size hole does a tree swallow birdhouse need?
A 1-1/2 inch entrance hole is the standard size for tree swallows. It admits swallows while keeping out larger competing birds such as starlings.
Should I paint a swallow birdhouse?
Leave the interior unpainted and unstained. If you want to protect the exterior, use a non-toxic exterior finish in a light color that does not overheat the box.
When should I clean out the box?
Clean the box after the nesting season ends, typically in late summer or early fall. Remove old nesting material and check that the drainage holes are clear before the next spring.
Conclusion
A well-built swallow box needs only a few boards, a drill and some screws. Follow the 1-1/2 inch entrance, drainage and placement guidelines above, and your box will be ready for the next nesting season. Check your local wildlife agency for any region-specific recommendations.
