Updated November 2026

This guide gives you a workable set of wooden purple martin birdhouse plans you can build in a weekend with basic tools. You will get overall dimensions, a cut list, assembly steps, and the placement details that determine whether martins actually move in. The design below is a simple, cavity-style compartment house, which is easier to build and clean than a gourd-style rack.

Materials and Cut List

Use untreated cedar, pine, or cypress, around ¾-inch thick. Avoid pressure-treated lumber, since martins are sensitive to fumes and chemicals. A single 1×6 board about 8 feet long and a 1×8 or 1×10 for the floor and roof will cover the job.

Shopping for one? See our guide: 5 Best Birdhouses with License Plate Roof Plans for Backyard Builders (2026).

Part Qty Dimensions (inches)
Front and back walls 2 5½ × 12
Side walls 2 6 × 12
Floor 1 6 × 6
Roof panels 2 7 × 8
Entrance hole baffle 1 5½ × 6

How to Build the Main Housing

  1. Cut all parts to the dimensions above. Mark the entrance holes on the front wall, 1¼ inches from the top edge, with the hole centered horizontally. Drill with a 2⅛-inch hole saw for the entrance.
  2. Drill a few ⅜-inch drainage holes in the floor and ventilation holes near the top of the side walls.
  3. Assemble the floor to the side walls with exterior wood glue and 1¼-inch galvanized or stainless screws. Keep the floor slightly recessed so rain runs off.
  4. Attach the front and back walls, then square the box before the glue sets. Check that the top edges are level.
  5. Fix the roof panels with a slight slope so water sheds toward the back. Use a hinged or removable roof if you plan to clean the house each season.

Mounting and Placement

Mount the house on a pole 12 to 20 feet high in an open area, with at least 40 feet of clear space around the entrance. Purple martins prefer open flight paths, so avoid placing the house under dense trees. Face the entrance away from prevailing winds and toward the morning sun.

Install a predator guard, such as a baffle or a stovepipe-style pole guard, before the first breeding season. Raccoons, snakes, and cats are the most common threats to nesting martins, and a guard is far more effective than trying to scare predators away afterward.

Timing and Maintenance

Put houses up in late winter or early spring, before the birds return from the south. Clean out nest material once the breeding season ends and check for mites or parasites. A thin layer of fresh pine shavings is enough bedding in most cases.

Common Mistakes

  • Using pressure-treated or painted wood with strong odors.
  • Placing the house in a shaded spot or near tall trees.
  • Making the entrance hole too large, which lets starlings and sparrows in.
  • Skipping ventilation and drainage holes, which leads to damp, overheated nests.
  • Forgetting a predator guard, the most common reason nesting attempts fail.
  • Exterior wood glue keeps joints tight through seasonal swelling. View on Amazon
  • Hole saw kit makes clean, accurate entrance holes without splitting the front wall. View on Amazon
  • Galvanized deck screws resist rust and hold the housing together outdoors. View on Amazon

If you want more ideas before you start, the Purple Martin Birdhouse Plans: A Step-by-Step Build Guide covers alternate layouts, and Free Purple Martin Birdhouse Plans: Build a 12-Room Gourd-Style House shows a multi-room option for larger colonies. For smaller cavity nesters, see DIY Wooden Birdhouse Plans: A Step-by-Step Build for Beginners.

FAQ

What size entrance hole do purple martins need?

A 2⅛-inch entrance hole is the standard size for purple martins. Smaller holes can exclude some competitors, but the diameter should not be reduced below what martins need to enter comfortably.

How high should a purple martin house be mounted?

Most builders mount houses 12 to 20 feet off the ground. Higher positions and open surroundings tend to attract martins more reliably.

Can I paint or stain a martin birdhouse?

Use a light, non-toxic exterior finish only on the outside, and keep the interior bare. Fumes and residues inside the nest compartment can harm the birds, so always let any finish cure fully before installation.

Conclusion

With the cut list, assembly steps, and placement tips above, you can build a purple martin house that is sturdy, ventilated, and easy to clean. Put it up early, protect it from predators, and keep the surrounding area open. Martins are social birds, so a well-placed house often draws a colony within a season or two.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.