Updated November 2026

If you need a router bit for cutting circles in wood, the right choice depends on what you are making: a shallow round tray, a deep bowl, a clean circular inlay, or a curved groove for a box lid. This list compares five bits and kits that cover those jobs. We judged each one on specifications stated in the listing, the cutting geometry suited to circular work, shank size compatibility with common hand routers, and owner feedback patterns that tend to come up for this type of tool.

Our top picks at a glance

  1. 14PCS Bowl & Tray Template Router Bit SetTOP CHOICEBest overall4PCS Bowl & Tray Template Router Bit SetView on Amazon
  2. 2Carbide Tipped Core Box Router Bit-1/4 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1" Cutting DiameterTOP CHOICEBest for multi-size bowlsCarbide Tipped Core Box Router Bit-1/4 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1" Cutting DiameterView on Amazon
  3. 3Fivepears Core Box Router Bit with 1/2 inch ShankTOP CHOICEBest for deep cutsFivepears Core Box Router Bit with 1/2 inch ShankView on Amazon
  4. 4YONICO Horizontal Crown Router Bit 2-Inch RadiusBest for large radius curvesYONICO Horizontal Crown Router Bit 2-Inch RadiusView on Amazon
  5. 5YONICO 14166q 1/2-Inch Diameter Core Box Router Bit 1/4-Inch ShankBest budget pickYONICO 14166q 1/2-Inch Diameter Core Box Router Bit 1/4-Inch ShankView on Amazon

Our Top Picks

The table below summarizes how the five products line up. Each product section follows with more detail.

Product Best for Key feature
4PCS Bowl & Tray Template Router Bit Set Bowls, trays and boxes Four-piece set with 1/4 inch shank and round nose cutting
Fivepears Core Box Router Bit Deep circular grooves 1-1/2 inch cutting diameter on a 1/2 inch shank
Carbide Tipped Core Box Router Bit Set Multi-size circular work Eight diameters from 1/4 inch to 1 inch
YONICO Horizontal Crown Router Bit Large radius curves 2-inch radius profile on a 1/2 inch shank
YONICO 14166q Core Box Router Bit Single-size budget cuts 1/2 inch diameter on a 1/4 inch shank

4PCS Bowl & Tray Template Router Bit Set

4PCS Bowl & Tray Template Router Bit Set 1/4 Inch Shank, Cove Juice Groove Router Bit, Carbide Tipped Circle Round Nose Cutting, Ideal for Making Wood Bowls, Trays, Boxes, Board Troughs

4PCS Bowl & Tray Template Router Bit Set 1/4 Inch Shank, Cove Juice Groove Router Bit, Carbide Tipped Circle Round Nose Cutting, Ideal for Making Wood Bowls, Trays, Boxes, Board Troughs

View on Amazon

Best for: Bowls, trays and boxes that need a clean round profile

This set suits woodworkers who make turned-look bowls, serving trays, or board troughs with a router and a circle-cutting template. It is also a good starting point if you want several profiles without buying each bit separately.

Key specs:

  • Four-piece set
  • 1/4 inch shank
  • Carbide tipped cutting edges
  • Round nose and cove profiles for circular work

Pros:

  • Covers several shallow-cut profiles in one purchase
  • Smaller shank suits compact palm and trim routers
  • Carbide edges are generally expected to hold up better than high-speed steel on hardwoods

Cons:

  • A 1/4 inch shank limits stability on heavy, deep passes
  • Works best in shallow passes, so multiple depth passes are needed for thick stock

Bottom line: Pick this set if you make bowls, trays or boxes and want several profiles from one kit.

View on Amazon

Fivepears Core Box Router Bit with 1/2 inch Shank

Fivepears Core Box Router Bit with 1/2 inch Shank 1-1/2 inch Cutting Diameter 1 Cutting Length Round Nose Router Bits for DIY Woodwork

Fivepears Core Box Router Bit with 1/2 inch Shank 1-1/2 inch Cutting Diameter 1 Cutting Length Round Nose Router Bits for DIY Woodwork

View on Amazon

Best for: Deep circular grooves and heavier cuts

A good fit for woodworkers cutting deeper round grooves, such as drawer pull recesses or lid seats, who want the extra rigidity of a 1/2 inch shank.

Key specs:

  • 1/2 inch shank
  • 1-1/2 inch cutting diameter
  • 1 inch cutting length
  • Round nose profile

Pros:

  • 1/2 inch shank is more stable than 1/4 inch in heavier cuts
  • Large cutting diameter handles bigger circles
  • Single bit keeps setup simple

Cons:

  • Requires a router that accepts a 1/2 inch collet
  • One diameter only, so you will need extra bits for other sizes

Bottom line: Choose this if you need a single, sturdy bit for deeper round grooves in a 1/2 inch collet router.

View on Amazon

Carbide Tipped Core Box Router Bit-1/4 5/16″ 3/8″ 1/2″ 5/8″ 3/4″ 7/8″ 1″ Cutting Diameter

Carbide Tipped Core Box Router Bit-1/4 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1" Cutting Diameter for DIY,Woodworking Project 8Pcs Carbide Cove Box Round Nose Router Bit Set 1/4" Shank,1/4" to 1"

Carbide Tipped Core Box Router Bit-1/4 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1" Cutting Diameter for DIY,Woodworking Project 8Pcs Carbide Cove Box Round Nose Router Bit Set 1/4" Shank,1/4" to 1"

View on Amazon

Best for: Multi-size circular work across many project types

Makers who cut circles of different diameters, such as coasters, inlays and round pulls, will get the most value from this eight-piece range.

Key specs:

  • Eight-piece set
  • Cutting diameters from 1/4 inch to 1 inch
  • 1/4 inch shank
  • Carbide tipped cutting edges

Pros:

  • Wide size range covers most small circular cuts
  • Carbide tips are a common expectation for hardwood work
  • Good variety for trying different sizes on one project

Cons:

  • Small shank means shallow passes are the safer approach
  • Smaller diameters can wander if the router is not well supported

Bottom line: A strong pick for makers who need many circle sizes and mostly work with shallow to medium cuts.

View on Amazon

YONICO Horizontal Crown Router Bit 2-Inch Radius

YONICO Router Bits Horizontal Crown 2-Inch Radius 1/2-Inch Shank 16181

YONICO Router Bits Horizontal Crown 2-Inch Radius 1/2-Inch Shank 16181

View on Amazon

Best for: Large radius curves and crowned edges

This bit is aimed at woodworkers making curved profiles along the edge of a round or arched piece, where a 2-inch radius is the design target rather than a small circle.

Key specs:

  • 2-inch radius profile
  • 1/2 inch shank

Pros:

  • Large radius profile is hard to match with small bowl bits
  • 1/2 inch shank adds stability for wide cuts
  • Useful for crowned table tops and arched panels

Cons:

  • Not a general circle-cutting bit, so it fits a narrower set of projects
  • Requires a 1/2 inch collet router

Bottom line: Pick this for curved edge profiles rather than cutting full circles in a panel.

View on Amazon

YONICO 14166q 1/2-Inch Diameter Core Box Router Bit 1/4-Inch Shank

YONICO 14166q 1/2-Inch Diameter Core Box Router Bit 1/4-Inch Shank

YONICO 14166q 1/2-Inch Diameter Core Box Router Bit 1/4-Inch Shank

View on Amazon

Best for: Single-size budget cuts in small projects

A practical choice for hobbyists with a trim router who need one round groove size and want to keep costs modest.

Key specs:

  • 1/2 inch cutting diameter
  • 1/4 inch shank
  • Core box profile

Pros:

  • Budget-friendly single-size option
  • 1/4 inch shank fits compact trim routers
  • Simple to use for occasional round cuts

Cons:

  • Only one diameter, so it does not cover a range of circles
  • Smaller shank suits light passes rather than heavy stock removal

Bottom line: A sensible pick for occasional round grooves on a small router when you do not need a set.

View on Amazon

Buying Guide

Cutting profile and circle type

Circle-cutting router bits come in several profiles: round nose (for bowl interiors), core box (for flat-bottomed round grooves), and cove or crown (for curved edges). Match the profile to the shape you need. A round nose bit creates a rounded bottom, while a core box leaves a flat floor with square corners. Decide the profile first, then choose the diameter.

Good picks for this: 4PCS Bowl & Tray Template Router Bit Set, YONICO 14166q Core Box Router Bit

Shank size and router compatibility

Most circle bits use either a 1/4 inch or 1/2 inch shank. Check the collet size on your router before buying. A 1/2 inch shank is generally more rigid and handles deeper or wider passes with less chatter. A 1/4 inch shank fits smaller trim routers and suits lighter work. Using a 1/4 inch shank in a router designed for 1/2 inch is not possible without a reducer collet, so verify compatibility first.

Good picks for this: Fivepears Core Box Router Bit with 1/2 inch Shank, YONICO Horizontal Crown Router Bit

Cutting diameter and range of sizes

If your projects vary, a set with several diameters saves time and avoids buying single bits repeatedly. Single bits make sense when you always cut the same circle size. Consider the largest circle you plan to cut and make sure the bit’s cutting diameter fits that job.

Good picks for this: Carbide Tipped Core Box Router Bit Set, 4PCS Bowl & Tray Template Router Bit Set

Cutting depth and passes

Circle cuts in hardwood put a lot of load on a small bit. Plan for multiple shallow passes rather than a single deep one, especially with bits of 1/4 inch shank. As a general approach, many woodworkers take passes of a few millimeters at a time, increasing depth gradually. Always check the manufacturer’s maximum cutting depth in the product details.

Good picks for this: Fivepears Core Box Router Bit with 1/2 inch Shank, Carbide Tipped Core Box Router Bit Set

Carbide tips versus high-speed steel

Carbide-tipped bits generally hold a sharp edge longer than plain high-speed steel, which matters when cutting dense hardwoods or working through many projects. Plain steel is more affordable but dulls faster. Carbide also tolerates heat better during long cuts. If you work mostly with softwoods or make only occasional cuts, steel may be enough.

Good picks for this: Carbide Tipped Core Box Router Bit Set, 4PCS Bowl & Tray Template Router Bit Set

Use with a circle-cutting jig

Many circle cuts are made with a router circle jig or a pivot pin fixed to the workpiece. Check that the bit’s shank and cutting length work with your jig and that the pivot distance matches the radius you want. A template set suits jig-based work well.

Good picks for this: 4PCS Bowl & Tray Template Router Bit Set, YONICO Horizontal Crown Router Bit

Care and sharpening

Keep bits clean of resin and pitch, which build up on the cutting edges and increase heat. Store bits in their cases or a rack so carbide tips are not chipped. Sharpen carbide bits only with diamond abrasives, or send them to a professional sharpening service, since standard grinding wheels can damage the carbide.

Good picks for this: Carbide Tipped Core Box Router Bit Set, YONICO 14166q Core Box Router Bit

FAQ

What is the best router bit for cutting circles in wood?

There is no single best bit for every project. A bowl and tray template set suits bowls and trays, a core box bit suits round grooves, and a multi-size set suits varied circle work. Match the profile and diameter to your project first.

Can I cut circles with a router bit without a jig?

Yes, for small circles you can use a freehand approach with a guide, but a pivot jig or circle-cutting attachment gives more consistent results. Jigs reduce the risk of the bit wandering off the intended path.

Do I need a router table to cut circles?

Not always. Most circle cuts are made with a handheld router and a pivot jig. A router table can help with small workpieces, but always follow the manufacturer’s guidance on feed direction and safe handling.

Is a 1/4 inch or 1/2 inch shank better for circle cutting?

A 1/2 inch shank is generally more stable and suits deeper or wider cuts. A 1/4 inch shank fits smaller routers and works well for lighter, shallower passes. Choose based on your router’s collet and the depth you need.

How deep should each pass be when cutting a circle in hardwood?

Use shallow passes and increase depth gradually rather than cutting full depth in one pass. This reduces strain on the bit and the router and gives cleaner edges. Check the manufacturer’s maximum cutting depth for each bit.

Are carbide-tipped bits worth the extra cost?

For frequent use on hardwoods, carbide tips usually keep their edge longer than plain steel. For occasional softwood work, plain steel may be sufficient. Consider how often you cut and what wood you use.

Should I wear eye and hearing protection when routing?

Yes. Routers produce flying chips and noise. Wear eye protection and hearing protection, and use dust collection where possible. If you are new to routing or working with unfamiliar tools, consider a session with an experienced woodworker or a local woodworking class.

Conclusion

For a router bit for cutting circles in wood, start by deciding the profile and size you need. The 4PCS Bowl & Tray Template Router Bit Set fits bowl and tray makers who want several profiles in one kit. The Carbide Tipped Core Box Router Bit Set suits makers who need a wide range of circle diameters. The Fivepears Core Box Router Bit works well for deeper round grooves on a 1/2 inch collet router. The YONICO Horizontal Crown Router Bit is the choice for large radius curved edges, and the YONICO 14166q Core Box Router Bit covers a single round-groove size on a budget. Always confirm your router’s shank size and follow safe routing practices.

Sources

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.