Updated November 2026
To router letters into wood, you trace or guide a router fitted with a small straight or V-bit along a template or stencil, cutting the letter shapes to a consistent depth. With the right bit, a sturdy template, and shallow passes, you can produce crisp, professional-looking lettering for signs, plaques, and gifts. This guide covers the setup, the cutting sequence, and the mistakes that most often ruin a good board.
Choose the Right Bit and Setup
For most lettering, a 1/4-inch shank straight bit with a diameter between 1/8 inch and 1/4 inch works well for the interior of letters. A V-bit gives sharp edges and a carved look, while a straight bit gives flat-bottomed, uniform letters. Use a template guide (a small collar that rides against your stencil) so the cut matches the template exactly.
Shopping for one? See our guide: 5 Best Wood Router Prices: How Much Is a Wood Router? 5 Picks Compared.
Pick a hardwood like maple, cherry, or oak for clean edges. Softwoods such as pine tear out more easily, so you will need a sharper bit and lighter passes.
Step-by-Step: Routing the Letters
- Print or draw your lettering at full size. Transfer it to the workpiece using a template made from 1/4-inch plywood or acrylic, or use stick-on vinyl stencils.
- Secure the board to your bench with clamps. Make sure nothing will shift under the router base.
- Set the cutting depth to 1/8 inch for a decorative relief, or up to 1/4 inch for deeper letters. Make several shallow passes rather than one deep one.
- Rout the outline of each letter first, then clear the interior. This keeps the edges clean and prevents chipping.
- Move the router counterclockwise around the outside of each letter, keeping the template guide firmly against the template edge.
- Sand lightly with 220-grit paper, then apply a finish that suits your project.
Managing Depth and Passes
Plan on three or four passes for a 1/4-inch-deep letter. Increase the depth by roughly 1/16 inch per pass. This reduces strain on the motor and gives you a cleaner cut with less burning.
Working Around Curves and Tight Corners
Tight curves in letters like S, C, and G require slower feed. Back off the speed when you approach a sharp inside corner, and let the bit finish the cut before you lift it.
Materials and Tools Checklist
- Wood router with a fixed or plunge base
- Straight or V-bit suited to your letter size
- Template guide (collar) matching the bit
- Stencil or template material
- Clamps and a stable workbench
- Dust collection or a shop vacuum
- Safety glasses and hearing protection
Common Mistakes
- Cutting too deep in one pass, which causes burning and tearout.
- Feeding the router clockwise on the outside edge, which pulls the bit away from the template.
- Skipping the outline pass and clearing the interior first, leading to chipped edges.
- Using a dull bit, which leaves rough surfaces and scorch marks.
- Routing without securing the board, which can cause shifting and ruined letters.
Recommended Gear
A set of template guides matched to your router base makes it easier to keep cuts consistent across a whole word. Look for a Freud 1/4-inch straight router bit set for a range of letter widths. View on Amazon
A clear acrylic template kit lets you see the letter underneath while you cut, which helps with alignment. View on Amazon
Related Reading
If you want to go further, How to Router Words Into Wood: A Step-by-Step Guide for Beginners covers longer lines of text and spacing. For ready-made patterns, see Wood Router Letter Stencils: 4 Best for Sign Making and Crafts (2026). Once you are comfortable with lettering, Wood Thread Cutting Router Bit: How to Cut Threads in Wood with a Router shows another router technique to try.
FAQ
What depth should I rout letters?
Most sign lettering is routed between 1/8 inch and 1/4 inch deep. Shallower cuts suit decorative work, while deeper cuts hold paint or finish better.
Can I rout letters freehand without a template?
It is possible but hard to keep consistent. A template with a guide collar is far more reliable for beginners.
Which wood is easiest for routed lettering?
Hardwoods such as maple and cherry give clean edges. Softwoods like pine work too, but they tear out more easily.
Conclusion
Routing letters into wood comes down to a sturdy template, a sharp bit, and shallow passes. Outline each letter before clearing the middle, and take your time around curves. With a little practice, your signs and plaques will look clean and professional.
