Updated November 2026

Red headed woodpecker birdhouse plans work best when they copy what these birds already want: a tall, roomy cavity with a large entrance and a rough interior they can chisel. In this guide you will get the interior dimensions, a cut list, and the build steps for a box sized for the species. Follow the numbers and you will end up with a nest box that is roughly 6 inches square inside and about 16 to 18 inches tall.

Know the Dimensions Before You Cut

Red-headed woodpeckers are larger than most cavity nesters, and they often excavate their own nest in dead or partly dead trees. A box that is too small or has a tiny entrance will simply be ignored. Plan for an interior floor of about 6 x 6 inches, an interior height of 15 to 18 inches, and an entrance hole of roughly 2 1/2 inches in diameter, placed 12 to 14 inches above the floor. Using a rough-sawn or unplaned board for the interior walls gives the birds something to grip.

Shopping for one? See our guide: 5 Best Birdhouses with License Plate Roof Plans for Backyard Builders (2026).

Cut List and Materials

Use 3/4-inch untreated pine, cedar, or cypress. Avoid pressure-treated lumber and painted or stained interiors. The cut list below assumes a box with a removable front panel for cleaning, which you will want every fall.

Part Qty Dimensions (inches)
Front (removable panel) 1 7 1/4 x 19
Back 1 7 1/4 x 21
Sides 2 6 1/2 x 21
Floor 1 6 1/2 x 6 1/2
Roof 1 8 x 9

Build the Box in Five Steps

  1. Cut the parts to the sizes above. Mark the back and sides so the back piece extends above the sides to support the roof.
  2. Drill the drainage and ventilation holes. Put four 1/4-inch holes in the floor and two 1/2-inch holes near the top of each side.
  3. Attach the floor and sides to the back with exterior wood glue and 1 1/4-inch galvanized or stainless exterior screws. Leave the front off for now.
  4. Cut the entrance hole in the front panel with a 2 1/2-inch hole saw, centered 12 to 14 inches above the floor. Screw the front on so it can be removed.
  5. Add the roof so it overhangs the front by about 1 inch, then attach it with hinges or a single screw on the back so it lifts for cleaning.

Mounting and Placement

Mount the box 10 to 20 feet off the ground on a dead tree trunk, a utility pole, or a post in an open area with scattered trees. Red-headed woodpeckers like open habitat with dead snags nearby, so a box on the edge of a clearing or orchard tends to work better than one tucked inside dense woods. Face the entrance away from prevailing winds and direct afternoon sun, and avoid placing it where predators can reach the hole from a branch.

Common Mistakes

  • Making the interior too small. A 4-inch-square box is a common bluebird design and will not suit this species.
  • Using a painted or treated interior. Owners often report birds rejecting boxes with fumes or chemical smells.
  • Skipping drainage holes. Trapped moisture leads to mold and failed nests.
  • Mounting too low. Lower boxes attract more predators and disturbance.
  • Forgetting annual cleaning. Remove old nesting material after the season ends to reduce parasites.
  • Exterior wood glue gives the joints strength against weather and swelling. View on Amazon
  • Hole saw set makes a clean 2 1/2-inch entrance without splitting the front panel. View on Amazon
  • Stainless exterior screws resist rust and hold the box together for many seasons. View on Amazon

If you want to compare designs before committing, the Pileated Woodpecker Birdhouse Plans: A Step-by-Step Build Guide covers another large woodpecker box, and Northern Flicker Birdhouse Plans: A Step-by-Step Build Guide shows a similar cavity design for a bird of comparable size. For a smaller option, Downy Woodpecker Birdhouse Plans: Build a Nest Box in One Afternoon uses a much tighter layout.

FAQ

What entrance hole size do red-headed woodpeckers need?

A hole of about 2 1/2 inches in diameter is the size most plans use for this species. Smaller holes may exclude the birds and let starlings or squirrels take the box instead.

How tall should the box be?

Aim for an interior height of 15 to 18 inches. The birds need vertical space to excavate and nest, and a shallow box will often go unused.

When should I clean the box?

Clean it once in late fall or early winter, after the nesting season is over. Remove old material, check for wear, and reinstall the front panel. Consult a local wildlife agency if you have concerns about nesting birds in your area.

Conclusion

With the right interior size, a large entrance hole, and a sturdy untreated build, these plans give red-headed woodpeckers a box they can use. Place it high on an open edge, keep the interior natural, and clean it each fall. Most of the success comes down to the dimensions, so measure twice before you drill.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.