Updated November 2026
Most hobbyists doing general woodworking need a fixed-base router in the 1.5 to 2.25 horsepower range with a 1/2-inch collet. That size handles edge profiles, dados, rabbets and most bit diameters without bogging down. This guide shows how to match a what size wood router do i need question to your actual projects, so you buy once and buy right.
Step 1: Decide Between Palm, Fixed-Base and Plunge Routers
Router body style matters as much as size. A palm router is light and suits trim work and small edge jobs. A fixed-base router is the workhorse for edge profiling and template work. A plunge router lets you start cuts in the middle of a board, which you need for mortises, sign lettering and inlay.
Shopping for one? See our guide: 6 Best Mid Size Wood Router Picks for Woodworkers in 2026.
If you can only buy one, a fixed-base model with plunge capability, or a plunge router with a fixed-base kit, covers the widest range of work.
Step 2: Match Horsepower to Your Bit Size
Horsepower determines how much material a router can remove without stalling. Larger bits, especially those over 1 inch in diameter, need more torque. Use these general guidelines:
| Typical work | Suggested motor size | Bit diameter range |
|---|---|---|
| Trim, small edges, laminate | 1 to 1.25 HP (palm or compact) | Up to 1/2 inch |
| General woodworking, dados, rabbets | 1.5 to 2.25 HP | Up to 3/4 inch |
| Raised panel doors, large profiles, surfacing | 2.25 HP and up | 1 inch and larger |
Manufacturers typically rate large-diameter bits for slower speeds, so check the bit label and your router’s speed range before cutting.
Step 3: Check the Collet Size
The collet determines which bit shanks fit. Most routers use 1/4-inch and 1/2-inch collets, and many include both. A 1/2-inch shank is more rigid and better for large bits, since less vibration means cleaner cuts. If you plan to buy larger bits later, choose a router that accepts 1/2-inch shanks or can be fitted with a 1/2-inch collet.
Step 4: Consider Your Project List
Write down the three projects you expect to build in the next year. If they include furniture edges, cabinet doors and shelf dados, a 1.5 to 2.25 HP fixed-base router with plunge capability is a sound choice. If you mainly make small signs or decorative trim, a compact router is enough. For sign lettering, see our guide to Wood Router for Lettering: 7 Best Picks for Sign Making in 2026.
Also think about table use. A router mounted in a table needs a fixed-base body that can be removed easily, which is worth knowing before you buy. For the difference between a router and a shaper in a table setup, read Wood Shaper vs Router Table: Which Tool Fits Your Shop? (2026).
Recommended gear
- Plunge router with 1/2-inch collet: Handles mortises, sign work and inlay in one tool, so it covers the most common tasks. View on Amazon
- Router bit set with 1/2-inch shanks: A sturdy starter set covers roundovers, chamfers and rabbets without buying single bits. View on Amazon
- Router table insert plate: Lets you use a fixed-base router upside down for edge work and safer small-piece routing. View on Amazon
Common mistakes
- Buying a palm router for jobs that need a plunge or fixed base.
- Choosing a 1/4-inch collet only, which limits you to smaller, less stable bits.
- Running large bits at high speed, which can cause burning and kickback.
- Taking too deep a pass in one go. Multiple shallow passes protect the motor and the bit.
- Skipping eye and hearing protection, plus dust collection.
FAQ
Is a 1.25 HP router enough for woodworking?
It works for small edges, trim and light dados. For larger bits or hardwood, a 1.5 to 2.25 HP model gives you more margin and less strain on the motor.
Do I need a plunge router to start?
Not always. A fixed-base router handles edge work. You will want plunge capability once you cut mortises or work in the middle of a panel.
Is a 1/2-inch collet always better than 1/4-inch?
For larger bits and general use, yes, because the shank is more rigid. Small detail bits are often sold in 1/4-inch shanks, so a router with both collets is the most flexible option.
Conclusion
For most woodworkers, a fixed-base or plunge router in the 1.5 to 2.25 HP range with a 1/2-inch collet is the right starting point. Match the motor to your largest bit, choose a body style that fits your projects, and check the collet before you buy. Always follow the manufacturer’s safety and speed guidance, and consult an experienced woodworker or instructor if you are unsure about setup.
