Updated November 2026
Woodworking plans for a side table give you a small, practical project that teaches the core skills of joinery, squaring and finishing. This guide walks you through a simple four-leg side table, with dimensions, a cut list and the steps to assemble it square and strong. A finished table of about 18 inches tall and 20 inches across works next to a sofa or bed.
Choose the Dimensions and Materials
A standard side table stands 22 to 26 inches tall, which keeps the top at a comfortable height for a sofa arm. The example here uses a 20-inch square top and 22-inch legs. Use 3/4-inch stock for the top and 1 3/4-inch square stock for the legs. Hardwoods like red oak, maple or walnut hold up well, while poplar is a budget pick that paints cleanly. If you are new to plans like these, the broader Woodworking Plans for Tables: A Step-by-Step Guide to Building Your First One covers how to read a plan before you cut.
Shopping for one? See our guide: Quilt Rack Plans Woodworking: 4 Best Builds for Beginners (2026).
Cut the Parts to Size
Mill your stock flat and square before cutting. Then cut each part to the lengths below and label them as you go.
- Top: 1 piece, 3/4 x 20 x 20 inches
- Legs: 4 pieces, 1 3/4 x 1 3/4 x 22 inches
- Aprons: 4 pieces, 3/4 x 3 x 15 inches (cut to fit between legs after joinery)
Cut all four legs in one pass on the table saw with a stop block so they match exactly. Mismatched legs are the most common reason a table wobbles.
Cut the Joinery and Assemble the Base
Each apron attaches to the legs with a mortise and tenon or with pocket screws. Mortise and tenon joints give the strongest result, while pocket screws are faster for a first build. Cut the tenons on the apron ends, then cut matching 3/8-inch-deep mortises in the legs with a router and a straight bit. Dry-fit the base before adding glue, and check that the frame sits flat on a level surface and that both diagonals measure the same. Adjust clamps until the assembly is square.
Attach the Top
Do not glue the top directly to the aprons. Wood moves with humidity, and a rigid glue joint will split the top. Instead, use figure-eight fasteners or small wood buttons that sit in slots cut into the aprons. This lets the top expand and contract across its width.
Sand and Finish
Sand progressively from 120 to 180 grit, then 220 grit for final passes. Break the sharp edges lightly with a sanding block. Apply a wiping varnish, polyurethane or oil finish, following the manufacturer’s directions for drying time and recoat intervals. Lightly sand between coats for a smooth surface. For a broader look at building furniture pieces like this one, see Woodworking Plans Coffee Table: 6 Steps to a Sturdy Build.
Common Mistakes
- Skipping the dry fit, which hides out-of-square joints until glue is already set.
- Gluing the top to the base, which causes cracking as the wood moves.
- Cutting legs one at a time, which leads to uneven heights.
- Sanding too coarsely before finishing, leaving scratches that show under stain.
- Rushing the finish; thin coats dry faster and resist dust better.
Recommended Gear
A good clamp set makes glue-up far easier, since a square base depends on even clamping pressure. View on Amazon
A random orbit sander speeds up flattening and smoothing the top without leaving swirl marks. View on Amazon
A combination square helps you check each leg and apron for square before the glue sets. View on Amazon
FAQ
What wood is best for a side table?
Red oak, maple and walnut are durable and attractive choices. Poplar works well if you plan to paint the table.
How long does this project take?
Most builders can finish the table over a weekend, though finish drying time adds extra days between coats.
Do I need a router to build this table?
A router makes clean mortises easier, but you can use pocket screws or a drill press with a mortising attachment instead.
Conclusion
With accurate cuts, a dry-fit check and a top attached with seasonal movement in mind, this side table will last for years. Once you have built one, the same joinery carries over to larger projects. Follow the steps above and you will have a sturdy table you made yourself.
Related reading
- Wren Birdhouse Woodworking Plans: A Step-by-Step Build With Cut List
- Woodworking Toy Plans Free: 5 Builds You Can Make This Weekend
- Woodworking Puzzle Box Plans: A Step-by-Step Guide for Beginners
- Woodworking Plans Chest Drawers: 4 Best Picks for Every Skill Level
- Top 3 Watch Box Woodworking Plans for Beginners and Heirloom Builds
- Top 3 Software for Drawing Woodworking Plans Compared
