Updated November 2026

Free chickadee birdhouse plans give you a simple, proven nest box that black-capped and Carolina chickadees will readily use. This guide walks you through a basic build, a cut list in common lumber sizes, and the details that keep the box safe and easy to maintain. You can finish the project in an afternoon with basic hand tools or a table saw.

Plan Dimensions and Materials

Chickadees nest in small, enclosed cavities, so the box should be compact. The layout below uses a floor of about 4 by 4 inches and a height of roughly 9 to 10 inches, which gives enough room for a nest cup without tempting larger birds. Use rough-sawn or dressed cedar, pine or other untreated softwood at least 3/4 inch thick. Avoid pressure-treated lumber and painted or stained interiors.

Shopping for one? See our guide: 3 Best Free Printable Octagon Birdhouse Plans Frees (2026): Our Picks.

Cut List (3/4-inch stock)

Part Quantity Dimensions
Front and back 2 4-1/2 in. x 9-1/2 in.
Sides 2 4 in. x 9-1/2 in. (angle top to match roof pitch)
Floor 1 4 in. x 4 in.
Roof 1 6 in. x 6 in.

Build the Box Step by Step

  1. Cut all parts to the sizes above. Check that the two sides are identical and that the front and back are square.
  2. Drill the entrance hole in the front panel, about 6 to 7 inches above the floor. Use a 1-1/8 inch bit. Chickadees need a hole this size to get in while keeping out larger birds.
  3. Drill four or five 1/4 inch drainage holes through the floor and a few 1/4 inch ventilation holes near the top of the sides.
  4. Rough up the inside faces of the front and back with a saw kerf or scoring tool so chicks can climb out when they fledge.
  5. Glue and screw the sides to the floor, then attach the front and back. Use galvanized or stainless exterior screws to prevent rust.
  6. Attach the roof with hinges or a lift-off arrangement so you can clean the box each fall. Leave a 1-inch overhang on the front to shed rain.

Placement and Mounting

Mount the box 4 to 6 feet off the ground on a tree, post or fence line. Face the entrance away from prevailing winds and direct afternoon sun. Chickadees prefer edges of woodland and yards with mature trees nearby. Avoid mounting the box where cats can reach it, and keep it away from feeders that attract house sparrows.

Maintenance and Seasonal Care

Clean out old nesting material once nesting season ends, typically in late summer or early fall, and check the box before the next spring. Chickadees often roost in nest boxes during winter, so some owners leave the old nest in place until late winter. Check the mounting hardware each year and replace any cracked panels.

Common Mistakes

  • Using an entrance hole larger than 1-1/8 inches, which lets in starlings and house sparrows.
  • Omitting drainage holes, which allows moisture to build up and chill chicks.
  • Painting or staining the interior, which can release fumes and harm the birds.
  • Mounting the box too low or in open, exposed areas where predators can easily reach it.
  • Making the box too deep, which makes it hard for parents to reach chicks and clean out after fledging.
  • Forstner bit set: Makes clean, flat-bottomed entrance holes without splintering the front panel. View on Amazon
  • Stainless exterior screws: Resist rust and keep the box solid for many seasons outdoors. View on Amazon
  • Cedar board stock: Naturally rot-resistant and lightweight, making it a favorite for nest boxes. View on Amazon

For more options, see Free Plans to Make a Birdhouse: 5 Easy Designs for Beginners and Wren Birdhouse Plans Free: Build a Cedar House in One Weekend, which use similar construction methods.

FAQ

What size hole do chickadees need?

A 1-1/8 inch entrance hole is the standard size for chickadees. It admits them while keeping out larger competitors like starlings.

How high should I mount a chickadee house?

Mount the box 4 to 6 feet off the ground in a sheltered spot with some tree cover nearby. This height helps deter ground predators.

When should I clean out the box?

Clean the box after the nesting season, usually in late summer or early fall. Remove old nesting material so the box is ready for the next spring.

Conclusion

With a few common boards, a 1-1/8 inch bit and basic screws, you can build a chickadee nest box in an afternoon. Keep the entrance hole small, add drainage and ventilation, and mount the box safely off the ground. Checking and cleaning it each year will keep it useful for seasons to come.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.