Updated November 2026
If you are asking how much for a table saw, the honest answer depends on the type you need. A benchtop saw suits small shops, hobbyists and anyone who lifts their tools onto a bench. A contractor saw with a stand suits people who cut full sheets of plywood and want more power and fence capacity. Pick the benchtop for portability and light projects, and the contractor saw for steady, heavier daily work.
| Criteria | Benchtop Table Saw | Contractor Table Saw |
|---|---|---|
| Typical motor | Universal or induction motor, often 1.5 to 2 HP | Induction motor, often 1.75 to 2 HP or more |
| Rip capacity | Commonly 20 to 30 inches to the right of the blade | Commonly 25 to 30 inches, with some larger fences |
| Portability | Lifts onto a bench or cart | Heavier, usually needs a stand or mobile base |
| Footprint | Small, fits a bench corner | Larger, needs dedicated floor space |
| Best for | Small projects, limited space | Sheet goods, frequent use |
Power and Motor Performance
Contractor saws generally carry larger motors, which helps when ripping thick hardwood or running a dado stack. Benchtop saws manage typical hobby stock well, but they can bog down on dense material if you push too hard. Winner: Contractor saw for sustained heavy cuts.
Capacity and Cutting Range
Rip capacity matters most when you break down plywood. Many contractor saws offer a fence that reaches roughly 25 to 30 inches, which handles a half sheet comfortably when supported properly. Benchtop models often top out lower, so large panels need outfeed support. Winner: Contractor saw.
Portability and Workspace
A benchtop saw can move between jobs, store in a closet, or sit on a folding stand. That mobility is valuable if you build on job sites or share a garage. Winner: Benchtop saw for flexibility and small spaces.
Accuracy and Fence Setup
Both types can cut accurately when the blade is aligned and the fence locks square. Contractor saws often have sturdier trunnions and fence rails, which many owners report holds alignment longer. Benchtop fences can flex more under load. Winner: Contractor saw, provided you keep it tuned. For setup guidance, see Bosch Table Saw Table: How to Choose, Set Up and Use One (2026).
Pros & Cons
Benchtop Table Saw
- Pro: Easy to move and store.
- Pro: Fits small shops and bench setups.
- Con: Less capacity and power for large sheet goods.
Contractor Table Saw
- Pro: Stronger motor for heavy, repeated cuts.
- Pro: Larger fence capacity for plywood.
- Con: Heavier and needs a dedicated spot.
Which Should You Choose?
- Choose a benchtop saw if you work in a small garage, build smaller projects, or need to move your saw often. View on Amazon
- Choose a contractor saw if you rip sheet goods regularly and want a stable, powerful machine. View on Amazon
If you are comparing options in more depth, 7 Best Table Saws for Woodworking Projects Compared (2026) covers a wider range of models, and Table for Dewalt Table Saw: A Step-by-Step Guide to Building One (2026) shows how to build a stand.
FAQ
Is a benchtop table saw enough for furniture building?
Yes, for many furniture projects it is enough, especially with careful stock preparation. Large panels may need extra outfeed support.
Do I need a stand for a contractor saw?
Usually yes. Most contractor saws are designed to sit on a stable stand or base, and the stand adds needed support for long workpieces.
How much for a table saw is worth paying more for?
Extra spending tends to buy better trunnions, a more accurate fence and a stronger motor. Those features matter most if you cut sheet goods often. Consult a professional if you are unsure which features suit your shop.
Conclusion
For most small shops, a benchtop saw offers the best balance of portability and capability. If you rip plywood daily, a contractor saw will serve you better over time. Match the saw to your workspace and the size of material you cut most.
