Updated November 2026
White-breasted nuthatch birdhouse plans call for a simple box with a 1 1/4-inch entry hole, roughly 4 inches square inside, and a rough-sawn or textured inner back so the birds can climb. You will finish with a cedar or pine nest box that fits the species, a cut list you can take to the lumber yard, and a clear plan for mounting it. The whole build takes an afternoon with basic tools.
Know What the Nuthatch Needs
White-breasted nuthatches nest in natural tree cavities, often old woodpecker holes, and they rarely use a box with a smooth interior. They walk headfirst down trunks, so a box that lets them grip the inside wall is more likely to attract a pair. Most successful nuthatch boxes share three traits: a small entry hole, a floor area of about 4 by 4 inches, and an interior depth of 8 to 10 inches. Keep the entry hole at 1 1/4 inches to exclude starlings and house sparrows.
Shopping for one? See our guide: 5 Best Birdhouses with License Plate Roof Plans for Backyard Builders (2026).
Cut List and Materials
Use 3/4-inch cedar, pine, or another untreated softwood with a finished thickness of about 3/4 inch. Do not use pressure-treated lumber, and avoid painted or stained interiors.
| Part | Quantity | Dimensions (inches) |
|---|---|---|
| Front | 1 | 5 1/2 x 12 |
| Back | 1 | 5 1/2 x 14 |
| Sides | 2 | 5 x 11 |
| Floor | 1 | 4 1/2 x 4 1/2 |
| Roof | 1 | 6 x 7 |
Cut the front piece to leave an 8-inch interior depth from the floor to the roof line. Adjust the back so it extends above the roof for mounting.
Build the Nest Box Step by Step
- Cut all parts to the sizes above. Square the ends with a miter saw or a fine hand saw.
- Drill a 1 1/4-inch entry hole centered on the front, about 7 inches above the floor. A Forstner bit gives the cleanest edge.
- Score the inside face of the back panel with a saw kerf every half inch, or roughen it with a rasp, so the nuthatches can grip.
- Attach the floor to the sides with exterior wood glue and 1 1/4-inch galvanized screws, leaving the floor flush at the bottom edge.
- Fasten the front and back to the sides with screws, then drill four 1/4-inch drainage holes in the floor corners.
- Add the roof with a 1-inch overhang on the front and sides, hinged or screwed in place so you can clean the box each fall.
Mounting Position
Mount the box 8 to 15 feet off the ground on a mature tree, ideally on the trunk facing away from prevailing winds. Use a 2-inch galvanized screw through the back panel, or a strap fastened to the tree. Avoid placing it where predators like raccoons can reach the entrance from a branch.
Common Mistakes
- Using a hole larger than 1 1/4 inches, which lets in competing species.
- Leaving the interior smooth, so the birds cannot climb in and out.
- Choosing treated wood or paint that can harm nesting birds.
- Failing to add drainage holes, which lets moisture build up in the nest.
- Mounting the box in full sun all day, which can overheat the nest.
Recommended Gear
- Forstner bit set: produces clean, flat-bottomed entry holes without tearout on the front panel. View on Amazon
- Exterior wood glue: holds the floor and side joints through seasonal weather changes. View on Amazon
- Galvanized deck screws: resist rust when the box is exposed to rain and humidity. View on Amazon
FAQ
What size hole does a white-breasted nuthatch need?
A 1 1/4-inch entry hole is the standard recommendation. It lets nuthatches in while keeping out larger competitors like starlings.
When should I clean out the box?
Clean the box in late fall or early winter, after the nesting season ends. Remove old nesting material and check for pests before the next spring.
Do nuthatches need a perch under the entrance?
No perch is needed. Nuthatches cling to the rough texture around the hole, so a perch can actually help predators reach the entrance.
Conclusion
With a 1 1/4-inch hole, a textured interior, and a secure mounting spot 8 to 15 feet up, this nest box suits white-breasted nuthatches well. Build it from untreated softwood, keep the cut list accurate, and check it each fall. For more builds from this series, see Wood Birdhouse Plans Free: 6 Easy Builds With Cut Lists and Simple Cedar Birdhouse Plans: A Step-by-Step Build in One Weekend.
