Updated November 2026

Wood router bits UK buyers look for usually come down to one decision: which bit fits the job in front of you. This guide walks through the main factors that matter, including shank size, cutting profile, bit material and the depth of cut, so you can pick a bit that cuts cleanly and fits your router. By the end, you will have a short checklist to use before every purchase.

Start with the Shank Size

The shank is the part of the bit that sits in the router collet. Most UK routers take either 6 mm or 8 mm shanks, and some larger machines use 12 mm or 1/2 inch. Check the collet size stamped on your router or in its manual before you buy. A bit with the wrong shank will not fit, and forcing a reducer collet can cause runout that leaves rough edges.

Shopping for one? See our guide: Top 7 CNC Router Wood Signs Picks: Bits and Kits for Sign Making.

Match the Profile to the Cut You Need

The profile is the shape of the cutting edge, and it decides what the bit does. Straight bits cut grooves and dados, rebates bits cut a step along an edge, and round-over bits soften corners. Flush trim bits follow a template or bearing, while chamfer and V-groove bits add decorative detail. Start with the operation you need, then narrow down the profile from there. The Wood Router Bit Types: A Guide to the Main Profiles and Uses article covers each profile in more depth.

Choose the Right Material and Cutting Edge

Most wood router bits are either high-speed steel (HSS) or carbide-tipped. HSS suits occasional use on softer timbers and is usually the lower-cost route. Carbide-tipped bits hold an edge far longer, handle hardwoods and manufactured boards like MDF and plywood, and produce cleaner finishes. For regular workshop use, carbide is the better long-term choice. Look for bits with an even number of flutes for smoother cuts on most work, and check that the cutting edges are well sharpened and free of visible chips.

Set the Cutting Depth and Speed Correctly

Never remove more than about one-third of the bit’s cutting length in a single pass on most hardwoods. For deeper cuts, take several shallow passes instead. Feed direction matters too: move the router against the rotation of the bit, so it pulls into the wood rather than running away from it. Match the router speed to the bit diameter, since larger bits need slower speeds. Your router manual and bit packaging will usually give recommended RPM ranges.

Quick Checklist Before You Buy

  1. Confirm your router’s collet size (6 mm, 8 mm or 1/2 inch).
  2. Identify the profile you need for the cut.
  3. Choose carbide-tipped for hardwoods and sheet materials.
  4. Check the cutting length is enough for your stock thickness.
  5. Plan multiple shallow passes for deep cuts.

Common Mistakes

  • Buying a bit with a shank that does not match the collet.
  • Cutting too deep in one pass, which causes burning and kickback.
  • Running the router too fast for a large-diameter bit.
  • Feeding the router in the wrong direction against the bit’s rotation.
  • Ignoring dull bits, which tear the grain instead of cutting it.
  • Collet reducer sleeves let you use a smaller-shank bit in a larger collet if your router supports it, though you should check compatibility first. View on Amazon
  • Router bit storage case keeps carbide edges from knocking together and makes it easier to find the profile you need. View on Amazon
  • Digital calipers help you confirm shank diameter and cutting length before you commit to a purchase. View on Amazon

FAQ

Do I need carbide-tipped bits for wood?

Not always, but carbide is recommended for hardwoods, plywood and MDF. HSS bits can work on softer timber for occasional jobs. Carbide stays sharp for much longer under regular use.

What shank size should I buy?

Check your router’s collet size first. Most UK routers use 6 mm, 8 mm or 1/2 inch shanks, and the bit must match exactly.

How deep should each pass be?

As a general guide, avoid removing more than about one-third of the cutting length in one pass on hardwood. Make several shallow passes for deeper grooves.

Conclusion

Choosing the right wood router bit comes down to shank size, profile, material and cutting depth. Work through the checklist above before buying, and you will avoid most of the common frustrations. Once you have the right bit, your cuts will be cleaner and safer.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our woodworking guides, checking product details against manufacturer specifications and owner feedback.