Updated November 2026
Choosing a bullnose router bit for 3/4 wood comes down to three things: the radius of the rounded edge, the shank size that fits your router collet, and whether the bit gives you a clean, burn-free profile in hardwood and softwood alike. This list compares seven bits and sets, sorted by how well each one fits those criteria. Every pick is a real Amazon listing, and the specs are taken from the product names and from what manufacturers typically state for these models.
Our top picks at a glance
- 1
TOP CHOICEBest overallYONICO Router Bits Bullnose 3/4-Inch Bead 1/4-Inch Shank 13117qView on Amazon - 2
TOP CHOICEBest for 1/2-inch colletsYONICO Bullnose Router Bits 3/4-Inch Bead 1/2-Inch Shank 13117View on Amazon - 3
TOP CHOICEBest for half-round profilesFreud 82-116: 3/8" Radius Half Round Bit with 1/2" ShankView on Amazon - 4
Best for beading workYONICO Bullnose Beading Router Bits 3/4-Inch Bead 1/2-Inch Shank 13195View on Amazon - 5
Best budget set5PCS Bullnose Beading Router Bits with 1/4-Inch Shank Carbide-Tipped CView on Amazon - 6
Best for stone and masonry edges3/4 inch B20 Diamond Demi bullnose Half Bullnose Profile Wheel DiamondView on Amazon - 7
Best for multi-radius setsBullnose Router Bit Set, Wolfride 1/2-Inch Shank 5pcs Half Round Router BitsView on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| YONICO Router Bits Bullnose 3/4-Inch Bead 1/4-Inch Shank 13117q | Overall use in 3/4 stock | 3/4-inch bead profile on a 1/4-inch shank |
| YONICO Bullnose Router Bits 3/4-Inch Bead 1/2-Inch Shank 13117 | Routers with 1/2-inch collets | 3/4-inch bead with a sturdier 1/2-inch shank |
| Freud 82-116 3/8″ Radius Half Round Bit with 1/2″ Shank | Half-round edges on trim | 3/8-inch radius on a 1/2-inch shank |
| YONICO Bullnose Beading Router Bits 3/4-Inch Bead 1/2-Inch Shank 13195 | Beading and decorative edges | Full 3/4-inch bead profile, 1/2-inch shank |
| 5PCS Bullnose Beading Router Bits with 1/4-Inch Shank Carbide-Tipped Corner Beading Bits Set | Trying several radii at low commitment | Five radii from 1/4 to 3/4 inch |
| 3/4 inch B20 Diamond Demi bullnose Half Bullnose Profile Wheel Diamond Hand Profiler Router Bit | Stone, concrete and countertop edges | Diamond profile wheel with 5/8-11 thread |
| Bullnose Router Bit Set, Wolfride 1/2-Inch Shank 5pcs Half Round Router Bits | Mixed-radius projects | Five half-round sizes on 1/2-inch shanks |
YONICO Router Bits Bullnose 3/4-Inch Bead 1/4-Inch Shank 13117q
Best for: Overall use on 3/4-inch stock
This is the most direct match for the search: a bullnose bit with a 3/4-inch bead, sized for common 3/4-inch boards and panels. It suits hobbyists with compact trim routers that accept 1/4-inch shanks.
Key specs
- Profile: bullnose with 3/4-inch bead
- Shank: 1/4 inch
- Intended stock: 3/4-inch wood
Pros
- Matches the 3/4-inch bead size directly
- Small shank works in lightweight palm routers
- Simple, single-purpose tool for edge work
Cons
- 1/4-inch shank is less stable at aggressive feed rates
- Not suited to heavy plunge cutting
Bottom line: Pick this if your router takes 1/4-inch shanks and you mainly want a clean 3/4-inch rounded edge on boards and panels.
YONICO Bullnose Router Bits 3/4-Inch Bead 1/2-Inch Shank 13117
Best for: Routers with 1/2-inch collets
Same 3/4-inch bead profile as the top pick, but on a 1/2-inch shank. Owners of full-size routers generally prefer the larger shank for stability and reduced chatter.
Key specs
- Profile: bullnose with 3/4-inch bead
- Shank: 1/2 inch
- Intended stock: 3/4-inch wood
Pros
- 1/2-inch shank is more rigid than 1/4-inch
- Same bead size for consistent results
- Fits the most common full-size router collets
Cons
- Requires a router that accepts 1/2-inch bits
- Larger bit has more inertia on small routers
Bottom line: The better choice for most shops with a standard 1/2-inch router, especially for longer passes on hardwood.
Freud 82-116: 3/8″ Radius Half Round Bit with 1/2″ Shank
Best for: Half-round edges on trim and moldings
Freud is a long-established name in router bits, and this half-round profile is aimed at users who want a smaller radius than a full bullnose bead. It fits trim, rails and furniture edges.
Key specs
- Profile: half round, 3/8-inch radius
- Shank: 1/2 inch
Pros
- Established brand with a long track record in router tooling
- Smaller radius suits trim and edge detail
- 1/2-inch shank for stable cuts
Cons
- Radius is smaller than a 3/4-inch bead, so it does not match the full bullnose look
- Single radius only
Bottom line: Choose this for trim and moldings where a 3/8-inch rounded edge is the goal, not a 3/4-inch bead.
YONICO Bullnose Beading Router Bits 3/4-Inch Bead 1/2-Inch Shank 13195
Best for: Beading and decorative edges
A 3/4-inch bead profile on a 1/2-inch shank, marketed toward beading work. It suits decorative panel edges, shelf fronts and cabinet detail.
Key specs
- Profile: bullnose beading, 3/4-inch bead
- Shank: 1/2 inch
Pros
- Full 3/4-inch bead for decorative work
- 1/2-inch shank for steadier cuts
- Good match for 3/4-inch stock
Cons
- Narrower use than a general-purpose bullnose
- Requires a 1/2-inch collet
Bottom line: A strong pick if beaded detail is the main goal and your router takes 1/2-inch bits.
5PCS Bullnose Beading Router Bits with 1/4-Inch Shank Carbide-Tipped Corner Beading Bits Set
5PCS Bullnose Beading Router Bits with 1/4-Inch Shank Carbide-Tipped Corner Beading Bits Set Radius:1/4",3/8",1/2",5/8",3/4"
Best for: Trying several radii at low commitment
This five-piece set covers 1/4, 3/8, 1/2, 5/8 and 3/4-inch radii on 1/4-inch shanks. It is a useful way to find the radius you like before buying a larger bit.
Key specs
- Radii: 1/4, 3/8, 1/2, 5/8, 3/4 inch
- Shank: 1/4 inch
- Carbide-tipped cutting edges
Pros
- Five sizes in one set
- Carbide tips hold an edge longer than plain steel
- Useful range for sampling profiles
Cons
- 1/4-inch shanks limit aggressive cutting
- Smaller bits need shallow passes to avoid burning
Bottom line: Best for hobbyists who want to test several radii on 3/4-inch stock with a compact router.
3/4 inch B20 Diamond Demi bullnose Half Bullnose Profile Wheel Diamond Hand Profiler Router Bit with 5/8-11 Thread for Grinder Polisher Granite Marble Concrete and Countertop Edge Shaping
3/4 inch B20 Diamond Demi bullnose Half Bullnose Profile Wheel Diamond Hand Profiler Router Bit with 5/8-11 Thread for Grinder Polisher Granite Marble Concrete and Countertop Edge Shaping
Best for: Stone, concrete and countertop edges
This is a diamond profile wheel for angle grinders and polishers, not a wood router bit. It is included because it matches the bullnose profile for hard materials, and it suits anyone who also edges stone. Use it only on the materials named in the listing.
Key specs
- Profile: 3/4-inch half bullnose (demi)
- Thread: 5/8-11
- Designed for granite, marble, concrete and countertop edges
Pros
- Clear 3/4-inch half-bullnose profile
- Diamond abrasive for hard stone
- Mounts on common grinder threads
Cons
- Not designed for wood and not a router bit
- Requires a grinder or polisher and wet-cutting precautions
Bottom line: Pick this only if you shape stone or concrete; for wood, choose one of the router bits above.
Bullnose Router Bit Set, Wolfride 1/2-Inch Shank 5pcs Half Round Router Bits
Bullnose Router Bit Set, Wolfride 1/2-Inch Shank 5pcs Half Round Router Bits |Diameter 1/4" 3/8" 1/2" 5/8" 3/4"
Best for: Mixed-radius projects
A five-piece half-round set on 1/2-inch shanks, covering 1/4 through 3/4 inch. It gives you one tool for several edge sizes across a project.
Key specs
- Radii: 1/4, 3/8, 1/2, 5/8, 3/4 inch
- Shank: 1/2 inch
Pros
- Five sizes on the sturdier 1/2-inch shank
- Covers the full 3/4-inch radius
- Good for projects with mixed edge sizes
Cons
- Set-level quality varies between individual bits, as with most multi-piece sets
- Smaller bits are more likely to burn if fed too slowly
Bottom line: A practical set for a 1/2-inch router owner who wants several radii, including 3/4 inch, in one purchase.
Buying Guide
Shank size and collet fit
Check your router’s collet before anything else. Most full-size routers take 1/2-inch shanks, while compact trim routers often take 1/4-inch. A bit that does not match the collet will not seat properly, and a 1/4-inch shank in a heavy router can wobble at speed.
Good picks for this: YONICO Router Bits Bullnose 3/4-Inch Bead 1/4-Inch Shank 13117q, YONICO Bullnose Router Bits 3/4-Inch Bead 1/2-Inch Shank 13117
Radius and bead profile
A bullnose bit is defined by its radius. A 3/4-inch radius gives a full, rounded edge on 3/4-inch stock. Smaller radii such as 3/8 inch produce a softer edge suited to trim. Match the radius to the look you want and to the thickness of your board, since a radius larger than the stock will leave a flat face.
Good picks for this: Freud 82-116 3/8″ Radius Half Round Bit with 1/2″ Shank, Bullnose Router Bit Set, Wolfride 1/2-Inch Shank 5pcs Half Round Router Bits
Bearing guidance
Many bullnose bits include a pilot bearing that rides along the edge and sets the cut depth. Check that the bearing sits flush with the stock and spins freely. A seized bearing causes burning and uneven profiles, so inspect it before each use.
Good picks for this: YONICO Bullnose Beading Router Bits 3/4-Inch Bead 1/2-Inch Shank 13195, YONICO Router Bits Bullnose 3/4-Inch Bead 1/4-Inch Shank 13117q
Cutting depth and passes
Do not try to take the full profile in one pass on 3/4-inch stock. Make two or three passes, increasing depth each time. Shallow passes reduce burning and tear-out, especially in hardwood like oak or maple.
Good picks for this: 5PCS Bullnose Beading Router Bits with 1/4-Inch Shank Carbide-Tipped Corner Beading Bits Set, YONICO Bullnose Router Bits 3/4-Inch Bead 1/2-Inch Shank 13117
Material: wood versus stone
Wood bits and diamond profile wheels are different tools. Router bits are built for wood and run at router speeds. Diamond wheels are built for stone and concrete and run on grinders. Using the wrong tool on the wrong material can damage the bit or the workpiece, so confirm the intended material before buying.
Good picks for this: Freud 82-116 3/8″ Radius Half Round Bit with 1/2″ Shank, 3/4 inch B20 Diamond Demi bullnose Half Bullnose Profile Wheel Diamond Hand Profiler Router Bit
Carbide quality and durability
Carbide-tipped bits hold an edge far longer than plain steel, which matters when cutting dense hardwood. Look for bits with carbide cutting edges and a clean finish on the bearing and body. Owners often report that quality varies between budget sets, so inspect each piece on arrival.
Good picks for this: 5PCS Bullnose Beading Router Bits with 1/4-Inch Shank Carbide-Tipped Corner Beading Bits Set, Freud 82-116 3/8″ Radius Half Round Bit with 1/2″ Shank
Set versus single bit
A set gives you several radii for one purchase, but each bit may see less use. A single bit is a better buy if you know the exact profile you need. Sets make sense for shops that edge many different stock sizes.
Good picks for this: Bullnose Router Bit Set, Wolfride 1/2-Inch Shank 5pcs Half Round Router Bits, YONICO Bullnose Router Bits 3/4-Inch Bead 1/2-Inch Shank 13117
FAQ
What size bullnose router bit do I need for 3/4-inch wood?
A 3/4-inch radius bit gives a full bullnose edge on 3/4-inch stock. Smaller radii such as 1/4, 3/8 or 1/2 inch are used for softer edges or trim. The right size depends on the look you want.
Which shank size should I choose?
Match the shank to your router’s collet. Full-size routers usually take 1/2-inch shanks, which are more stable. Compact trim routers often take 1/4-inch shanks. Check your router manual before buying.
Can I use a bullnose bit on plywood?
Yes, but plywood edges are layered and can chip. Use a sharp bit, take shallow passes and consider a backing board to reduce tear-out.
How do I prevent burning when routing 3/4 wood?
Take two or three shallow passes instead of one deep cut, keep the router moving steadily and make sure the bearing spins freely. Slow feed rates on small bits often cause burning.
Do I need a router table for bullnose work?
Not always. Handheld routing works for most edges, but a router table gives better control on small pieces. For long edges on large panels, a table can improve consistency.
Are carbide bits worth it for hardwood?
Carbide cutting edges generally last longer than plain steel in dense hardwood. The difference matters most on frequent use. Owners often report that carbide bits keep a cleaner profile over longer runs.
Can a stone diamond wheel replace a wood router bit?
No. Diamond profile wheels are made for stone and concrete and run on grinders. Wood router bits are made for router speeds and wood cutting. Use the tool designed for each material.
Conclusion
For most people routing 3/4-inch stock, the YONICO bullnose bits offer a direct match to the 3/4-inch bead profile, with the 1/2-inch shank version better suited to standard full-size routers. If you need softer trim edges, the Freud half-round bit fits that job. A multi-radius set helps when you are unsure which radius you want, and the diamond wheel is only for stone and concrete. Match the shank to your router, confirm the material, and take shallow passes for the cleanest result.
Consult the manufacturer’s instructions for your router and bit before use, and wear eye and hearing protection during routing.
Sources
- Workplace guidance on power tool safety, including guarding and eye protection for routing (osha.gov)
- Consumer safety information on power tools and protective equipment (cpsc.gov)
