Updated November 2026
Table saw extension tables give you more surface area for holding long boards, sheet goods and crosscuts without the wobble of a loose setup. Most woodworkers come to them when a 27-inch saw top stops being enough for ripping stock or supporting the back end of a board. The picks below were chosen by checking product listings, manufacturer specifications and the patterns owners tend to report: fit to common saw tops, rigidity, included hardware and whether the piece stores out of the way. Each option serves a slightly different shop need.
Our top picks at a glance
- 1
TOP CHOICEBest overallCast Iron Table Saw Router Extension Wing, Router Table Top, 27" x 16"View on Amazon - 2
Best for router-table use with a fenceMLCS 9769 Cast Iron Table Saw Router Table Extension Wing – with FenceView on Amazon - 3
Best for long-board outfeed supportTable saw rear out feed support extension, extends 18 in. and stores fView on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| Cast Iron Table Saw Router Extension Wing | General extra table surface | 27″ x 16″ cast iron top |
| MLCS 9769 Cast Iron Table Saw Router Table Extension Wing | Router table conversion | Includes fence |
| Table saw rear out feed support extension | Long-board outfeed | Extends 18 in., stores flush |
Cast Iron Table Saw Router Extension Wing, Router Table Top, 27″ x 16″
Best for: General extra table surface beside the saw.
This wing suits woodworkers who want a flat, heavy surface to support panels and workpieces alongside the blade. Owners often report that the cast iron top feels stable under load.
Pros
- Large 27″ x 16″ top adds real support area
- Cast iron resists flexing under heavy stock
Cons
- Heavy to lift on and off the saw
MLCS 9769 Cast Iron Table Saw Router Table Extension Wing – with Fence
Best for: Router table conversion and fence-guided work.
This option fits shops that want to use the saw top as a router table as well. The included fence makes it practical for edge work on the wing.
Pros
- Includes a fence for guided routing
- Cast iron construction matches the saw top
Cons
- Setup takes more time than a plain wing
Table saw rear out feed support extension, extends 18 in. and stores flush to table, extends working depth of bosch 4000 BOSCH TS1016 Outfeed Support Assembly
Table saw rear out feed support extension, extends 18 in. and stores flush to table, extends working depth of bosch 4000 BOSCH TS1016 Outfeed Support Assembly
Best for: Long-board outfeed support.
This support is for woodworkers who regularly rip or crosscut long stock and need the back of the board supported at the same height as the saw top. Manufacturers specify an 18-inch extension that stores flush when not in use.
Pros
- Extends working depth by 18 inches
- Stores flush to the table when not needed
Cons
- Designed for a specific Bosch saw assembly, so confirm compatibility first
Buying Guide
Match the Extension to Your Saw Top
Check the mounting pattern and top dimensions before buying. A wing built for one brand may not line up flush with another saw’s table, which causes height mismatches that ruin cut accuracy.
Decide Between a Plain Wing and a Router Setup
If you only need extra support, a plain wing is enough. If you plan to rout on the extension, look for a model that includes a fence and a flat, rigid top.
Consider Outfeed Support for Long Stock
Rear or side outfeed supports help when boards run longer than the saw top. Keep the support at the same height as the blade table, or the board will tilt and bind.
Think About Storage and Weight
Cast iron adds stability but also weight. If you move your saw often or have limited space, a unit that stores flush or comes off easily will be easier to live with.
Good picks for this: Cast Iron Table Saw Router Extension Wing and Table saw rear out feed support extension
For safe use of any extension, review the guidance in Safety for Table Saw: 7 Habits That Prevent Kickback and Injury and Riving Knife Table Saw: How to Set It Up and Use It Safely (2026). If you are building your own support, Table Saw with Sled: How to Build and Use One Safely (2026) covers a related approach.
FAQ
Do table saw extension tables fit every saw?
No. Mounting patterns and top sizes vary by brand, so confirm that the extension matches your saw’s table dimensions and mounting holes before ordering.
Can I use an extension table as a router table?
Some extensions, such as wings with a fence, are designed to support routing. Plain wings are for support only and may not provide the stability or fence control a router table needs.
Do I need outfeed support if I already have a wing?
A wing supports the side of the board, while an outfeed support holds the back end. Long rips often benefit from both, but short-stock work may only need one.
Conclusion
For general extra surface, the Cast Iron Table Saw Router Extension Wing is the most straightforward choice. If you want to rout on the saw top, the MLCS 9769 with its fence fits that need. For long boards that need back support, the rear out feed support extension is the better pick, provided it matches your saw.
Sources
- Workplace guidance on power saw guarding and machine safety (osha.gov)
- Injury prevention information relevant to power tool use (cdc.gov)
- Standards and measurement guidance for precision dimensions (nist.gov)
